The B-Line Sendstorm LITE needs no introduction. Everything you love about the Original Sendstorm in a lighter and tighter form factor. Still utilises the same arms as the OG Sendstorm, so if you want to move across to the LITE, you’re only 3 x 2mm plates away.

B-Line Sendstorm Lite 5″ FPV Racing Frame Kit V2

The B-Line Sendstorm LITE needs no introduction. Everything you love about the Original Sendstorm in a lighter and tighter form factor. Still utilises the same arms as the OG Sendstorm, so if you want to move across to the LITE, you’re only 3 x 2mm plates away. Designed and refined by Whodeany.

Features

• 3d prints available for download from the B-Line site to print your own stuff. A range of locked camera angle mounts and different antenna mounts available.
• TRUE X layout
• 6mm Chamfered arms for rigidity and pointed ends for optimal launch pad grip
• 20*20 STACKS ONLY
• NANO CAM ONLY
• Press nuts for stack mounting
• Chamfered top plate and bottom plate
• Die cut battery pad
• A few different turtle fins to choose from, (original Sendstorm fin, front fin or rear fin)
• Strong stepped 6065 28mm standoffs
• Camera is as protected as you can get, mounted between the standoffs

Hardware Specifications

• 1x Sendstorm Lite top plate
• 1x Sendstorm Lite main plate
• 1x Sendstorm Lite bottom plate
• 4x Sendstorm Lite 6mm Arm

Versions

• V1.1 – Original
• V1.2 – Strengthened sandwich plates
• V1.3 – Removal of rear zip tie points in main/bottom plates to remove point of failure + increase strength around standoff screws
• V2.0 – 3mm longer body overall (2mm extra camera to stack clearance + 1mm stack to rear standoff clearance). Some 20×20 electronics now have a larger footprint than when the frame was first designed so this accommodates for most of those. The main plate now includes press nuts for stack mounting. This ensures everyone is using the ‘Golden Nut’ at the bottom of their stack, so you don’t have excess noise in your betaflight tune, and also allows for easier/faster replacement of broken main/bottom plates.

3D Print

If you prefer to handle the printing yourself, you can access the 3D print files through this Google Drive link!

Includes

• 1x B-Line Sendstorm Lite 5″ FPV Racing Frame Kit V1.3 (base option includes hardware only)

Optional

• Adding 3D printed parts is an additional option. Please add the frame kit to your cart, and then specify your preferred 3D print base combo. Printing is done on-demand.