BetaFPV F4 AIO 1-2S Brushless Flight Controller

$64.95

Or 4 fortnightly payments of $16.24 with Afterpay More info

3 in stock

Earn 324 Points

BetaFPV F4 AIO 1-2S Brushless Flight Controller

F4 1S AIO FC(No Rx) integrates 3 components as F411 FC, 5A ESC and 25mW VTX. It supports external receivers like TBS Crossfire, Frsky XM+ and Spectrum DSMX etc. Meanwhile, this version can handle the 2S power system.

betafpv australia banner promotion shop description mantisfpv

BetaFPV F4 AIO 1-2S Brushless Flight Controller

Features

  • Integrated with a 25mW VTX, this AIO board(Frsky/Futaba Rx) is ultralight only 3.92g, which can extremely save the weight of building drone, perfectly suitable for the 1S weight-sensitive drone.
  • F4 1S AIO FC(No Rx) not only integrates with the 25mW VTX but also supports a 1-2S power system, which is perfectly suitable for the weight-sensitive dron.
  • Specially added with 2 RGB LED indicators, this board brings the drone an incredible light effect while pilots flying on the night.
  • This board can handle 5A continuous current(6A burst), supports the 1S lipo battery, brings the drone a stronger flight performance.
  • Come with a BT2.0 connector, it solves the problem of voltage sag, the discharge can be more efficient, which brings this board a better performance on function for power and responsiveness.
  • This is the no RX version.

Specification of F4 1S AIO FC (No Rx Version)

  • Item: F4 1S AIO FC(No Rx)
  • Weight: 3.83g (without antenna and BT2.0 connector)
  • VTX Power: 25mW
  • CPU: STM32F411CEU6 (100MHZ )
  • Six-Axis: MPU6000 (SPI connection)
  • Firmware version: betaflight_4.2.0_STM32F411
  • Receiver: Support External Receiver, SPI Receiver, including Frsky XM/XM+ receiver, Futaba receiver, Crossfire receiver and DSMX receiver
  • Motor Pin Connecter: 1.25mm Header Pins
  • Mounting hole size: 29mm x 29mm / suitable for almost all kind of whoop frame

Specification of ESC

  • Built-in ESC with 5A continuous and peak 6A current
  • Input voltage: 1-2S Lipo
  • ESC firmware: S_H_70_REV16_7.HEX
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM
  • 4 Indicators: Receiver indicator (Green)/Flight control status indicator (Blue)/Flight control power indicator (Red)/VTX indicator (Pink)

Diagram for F4 1S AIO FC(No Rx)

Includes

  • 1x BetaFPV F4 AIO 1-2S Brushless Flight Controller

 

Price Match Challenge

If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

  • Such as - https://www.mantisFPV.com.au/some-product/
  • Accepted file types: jpg, jpeg, png, pdf, webm, Max. file size: 20 MB.
    20MB limit, valid image files only.

MantisFPV is the best place to buy BetaFPV F4 AIO 1-2S Brushless Flight Controller online.

Our stock levels

Are accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.

Pricing

We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, click on the “Price Match Request” tab on this page.

Same day shipping

Orders received before 2pm on weekdays are processed and shipped that very day.

Local Pickup

Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW.

Australian owned and operated

Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Help keep our profits within our shores. Heck, who can really tollerate deliveries that takes 3 months?!

Shocker!… we have running costs

Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay for wages, rent, taxes and the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

0
    0
    Your Cart
    Your cart is emptyReturn to Shop

      Appease your FPV addiction with 5% off...

      Simply sign up to our newsletter for FPV DEALS, and we'll send you a 5% off your first order CODE via email.

      LEGEND! But we need to make sure you're not a ROBOT first. Please confirm your email by clicking on the confirmation link in the email.

      Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.