FPV parts online Australia fast

BetaFPV LiteRadio 3 Radio Transmitter ELRS 2.4G Mode 2

$119.95

LiteRadio 3 Radio Transmitter is the newest remote control in the LiteRadio series. This transmitter features an ergonomically designed handle and has superb performance in its working time, newly updated gimbal, and internal Express ELRS.

In stock

Earn 359^ points.

Description

BetaFPV LiteRadio 3 Radio Transmitter ELRS 2.4G Mode 2

betafpv brand colour australia mantisfpv

 

LiteRadio 3 Radio Transmitter is the newest remote control in the LiteRadio series. This transmitter features an ergonomically designed handle and has superb performance in its working time, newly updated gimbal, and multi-protocol support (Frsky version). Besides, this version supports BETAFPV Configurator which is a utility designed to simply update, configure, and tune the radio controller.

betafpv literadio 2 radio transmitter mantisfpv australia banner 1

Features

LiteRadio 3 is a remote control radio transmitter designed primarily for RC models, including multirotor, aeroplanes. It gives you more than you ever thought possible from an entry-level 8-channel radio.

  • 8 channels in total.
  • USB Joystick support for most practice simulators.
  • Nano module bay for external TX module.
  • Newly designed joystick gimbal for longer usage life.
  • Support BETAFPV Configurator for updating, configuring, and tuning.
  • Provide ExpressLRS 2.4G protocol version and Frsky protocol version for option.
  • Built-in 2000mAh battery and USB charge supported.

Bullet points

  • LiteRadio 3 upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter, which is more convenient for the beginner racer to operate.
  • Equipped with a built-in 2000 mAh 1S battery, LiteRadio 3 can work up to 15 hours without an external module, bringing an excellent endurance performance.
  • Comes with a built-in charging module, LiteRadio 3 supports USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously.
  • Newly designed with a nano bay, it supports the external TX module. Highly recommend BETAFPV ELRS Nano Module, which is compatible with the LiteRadio 3 radio transmitter and makes CRSF protocol available.
  • Adopted the rubber coat, LiteRadio 3 is ergonomic and has the shape of a gaming controller. It’s comfortable to hold, and the anti-slip texture on the handles allows for a solid grip.
  • It is the safest and quickest method to get started by using a model practice simulator for starters. LiteRadio 3 radio transmitter supports most of the simulators on market with comprehensive configuration.

Specification

  • Item: LiteRadio 3 Radio Transmitter
  • Frequency Range: 2.4G
  • 2.4G System: CC2500/SX1280
  • Channel: 8
  • Support Protocol: Futaba S-FHSS/Frsky FCC D16/Frsky LBT D16/Frsky D8, ExpressLRS 2.4G
  • Power: ELRS version 25mW/50mW/100mW, Frsky version 100mW
  • Adapted Drone Type: Multirotor, Airplane
  • Support USB Charging / Firmware Update
  • Support BETAFPV Configurator / Most Practice Simulator
  • LED Light: Green-Power On / Red-Warning if the voltage is lower than 3.5V / Blue-Normal
  • Battery: Built-in 2000mAh 1S Battery
  • Charging Connector: USB 3.0 Type-C
  • Supports external TX nano module

betafpv literadio 2 radio transmitter banner 2 mantisfpv

Improvements on LiteRadio 3

Compared with LiteRadio 2 SE, the LiteRadio 3 is equipped with a 2000mAh 1S battery, bringing an excellent endurance performance up to 15 working hours without an external module. Reserving a nano bay on the backside, it supports an external module for use with ELRS Nano TX Module, which supports CRSF protocol. Moreover, the LiteRadio 3 gimbal is newly updated with an accurate potentiometer and adjustable stick ends.

betafpv literadio 3 radio transmitter frsky mode 2 mantosfpv differences

BETAFPV Configurator

BETAFPV Configurator is a utility designed to simplify updating, configuring, and tuning the radio transmitter.

Download address: https://github.com/BETAFPV/BETAFPV_Configurator/releasesThe function of the BETAFPV Configurator is listed below.

  • Basic radio controller setup, like mode switch, turn on/off RF modules.
  • Full function of the ExpressLRS configuration, like outpower, packet rate, etc.
  • Channel mixer for fix wing drones.
  • Firmware update.

betafpv literadio 2 radio transmitter banner 2 mantisfpv configuration

How to switch the protocol

Note: Switching internal protocol is only available for the Frsky version radio transmitter. ExpressLRS version can only switch to the external TX module.

To change protocols and TX module, here are the steps:

  • Power the radio transmitter off;
  • Press and hold the BIND button while powering the radio transmitter back on;
  • Then the flash colour and times of the LED before buzzer alarms will change, according to the tables above.
The Frsky version could support 4 different internal protocols, including Frsky D16 FCC, Frsky D16 LBT, Frsky D8, and Futaba S-FHSS. The protocol is indicated by the flashing times of the LED when power on, before the buzzer alarms.

FRSKY VERSION

  • LED STATUS: Red flash once – Internal Frsky D16 FCC (ACCST 1.X Version)
  • LED STATUS: Red flash twice- Internal Frsky D16 LBT (ACCST 1.X Version)
  • LED STATUS: Red flash three times – Internal Frsky D8
  • LED STATUS: Red flash four times – Internal Futaba S-FHSS
  • LED STATUS: Purple flash free times quickly – Internal TX Module Off and Run External TX Module

EXPRESS ELRC VERSION

  • LED STATUS: Red flash once – Internal ELRS
  • LED STATUS: Purple flash free times quickly – Internal TX Module Off and Run External TX Module

Note: LiteRadio 3 Frsky version only works with D16 ACCST 1.X Frsky protocol. So if you use a Frsky receiver with D16 ACCST 2.X version or ACCESS version, the binding will fail.

betafpv literadio 3 radio transmitter frsky mode 2 package mantisfpv

Additional information

Brand

Reviews

Be the first to review “BetaFPV LiteRadio 3 Radio Transmitter ELRS 2.4G Mode 2”

Your email address will not be published.

Price Match Request

If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

Name*
Such as: https://www.mantisFPV.com.au/some-product/
Accepted file types: jpg, jpeg, png, pdf, webm, Max. file size: 20 MB.
20MB limit, valid image files only.

Why Us

MantisFPV is the best place to buy the BetaFPV LiteRadio 3 Radio Transmitter ELRS 2.4G Mode 2 online.

Our stock levels

Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.

Pricing

We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.

Same day shipping

Orders received before 2pm on weekdays are processed and shipped that very day.

Local Pickup

Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW.

Australian owned and operated

Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Help keep our profits within our shores. Heck, who can really tolerate deliveries that takes 3 months?!

Shocker!… we have running costs

Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay for wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

Loyalty Program

Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.

Return Policy

All FPV products will generally require an RMA from the manufacturer themselves, not us.

If you feel that the products are defective, please contact the manufacturer directly.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop