FPV parts online and in-store. Sydney rules!

Happymodel Moblite7 Ultralight 1S 75mm Brushless Whoop SPI Frsky

$167.95

We are introducing the Moblite7 Ultralight FPV Brushless Whoop! This whoop is made in collaboration with FPV pilot “Mr Shutterbug,” this is one of the lightest 75mm drones on the market!

Sold out

SKU: MF-3309367363 Categories: ,

Description

Happymodel Moblite7 Ultralight 1S 75mm Brushless Whoop SPI Frsky

happy model mantisfpv australia brand logo

About this product

We are introducing the Moblite7 Ultralight FPV Brushless Whoop! This whoop is made in collaboration with FPV pilot “Mr Shutterbug,” this is one of the lightest 75mm drones on the market! The Moblite7 features the RunCam Nano3, Onboard SPI Frsky D8 Receiver, DiamondF4 FR FC, 5A BLheli_S 4-in-1 ESC, 5.8GHz VTX, and more! This mini, lightweight whoop (75mm) will take you to hard-to-get places!

Features

  • The lightest 1s 75mm brushless whoop
  • Powerful and efficiency
  • The lightest 1s AIO 5IN1 F4 flight controller
  • New Unibet EX0802 brushless motors
  • VTX power switchable 25mw~200mw
  • Low profile Canopy design

Specifications

  • Brand Name: Happymodel
  • Item Name: Moblite7 1S 75mm ultra-light brushless whoop
  • Wheelbase: 75mm
  • Size: 97mm*97mm*25mm
  • Weight: 19.5g (without battery)
  • Weight:36g(with Original 1s 650mah Lipo battery )

Motor

  • Mode: EX0802 19000KV
  • Configu-ration:9N12P
  • Stator Diamter:8mm
  • Stator Length:2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
  • Weight(g):1.7g
  • No.of Cells(Lipo):1S only

Flight Controller

  • (Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4F
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Original whoop size compatible
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G VTX
  • Built-in SPI Frsky/Flysky receiver
  • Built-in 5V 1A BEC

Onboard 4-in-1 ESC

  • MCU upgraded to EFM8BB21
  • Power supply: 1S LiPo/LiPo HV
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_H_50_REV16_8.HEX
  • Default protocol: DSHOT600

Onboard Frsky SPI D8 Receiver Version

  • SPI BUS receiver Frsky D8 compatible
  • Compatible Non-EU transmitter D8 model
  • Channels: 8ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m

Onboard 5.8GHz VTX

  • Output power: 25mw~200mw switchable
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Frequency: 5.8GHz 5bands 40 channels(include Race band)
  • Smart audio ready

Runcam Nano3

  • Model: RunCam Nano 3
  • Image Sensor: 1/3″ CMOS
  • Horizontal Resolution: 800TVL
  • Lens : 2.3mm(M6.5) FOV 140°
  • Signal System: PAL/NTSC Non-Switchable
  • S/N Ratio: >50dB
  • Electronic Shutter Speed: Auto
  • Auto Gain Control (AGC): Auto
  • Min. Illumination: 0.01Lux@1.2F
  • D-WDR: Auto
  • Day/Night: Color
  • Power: DC 3-5.5V
  • Current: 110mA@5V 120mA@3.3V
  • Housing Material: ABS
  • Net Weight: 1.2g
  • Dimensions: L14mm*W14mm*H9mm

Lipo Battery

  • Capacity:650mAh
  • Voltage:3.8v
  • Continuous Discharge Rate: 30C
  • Instantaneous discharge rate: 60C
  • Size: 60mmx18mmx8mm
  • Weight: 16g
  • Connector: PH2.0

Includes

  • 1 x 75mm Frame (Mobula7 frame)
  • 1 x Option1: DiamondF4 FR built-in SPI Frsky receiver
  • 4 x EX0802 KV19000 Unibell brushless motor
  • 1 x HQPROP 40MMX2 propeller(4cw+4ccw)
  • 1 x Runcam Nano3
  • 1 x Built-in 5.8G 40ch 25mw-200mw VTX
  • 2 x 1s 650mah Lipo battery
  • 1 x Propeller disassemble tool
  • 1 x Screwdriver
  • 1 x Happymodel Carry case

Additional information

Brand

Reviews

Be the first to review “Happymodel Moblite7 Ultralight 1S 75mm Brushless Whoop SPI Frsky”

Your email address will not be published. Required fields are marked *

 

Price Match Request

 

If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

"*" indicates required fields

Name*
Such as: https://www.mantisfpv.com.au/some-product/
Accepted file types: jpg, jpeg, png, pdf, webm, Max. file size: 20 MB.
20MB limit, valid image files only.
This field is for validation purposes and should be left unchanged.

Why Us

MantisFPV is the best place to buy the Happymodel Moblite7 Ultralight 1S 75mm Brushless Whoop SPI Frsky online.

Our stock levels

Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.

Pricing

We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.

Same day shipping

Orders received before 1pm on weekdays are processed and shipped that very day.

Local Pickup

Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.

Australian owned and operated

Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!

Shocker!… we have running costs

Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

Loyalty Program

Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.

Trade Accounts

If you run a business (government or private) or just a one-person media agency, consider applying for a MantisFPV trade account.

Return Policy

All FPV products will generally require an RMA from the manufacturer themselves, not us.

If you feel that the products are defective, please contact the manufacturer directly.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop