Holybro Atlatl HV V2 5.8GHz Video Transmitter

$42.60

Or 4 fortnightly payments of $10.65 with Afterpay More info

A stackable VTX with tramp telemetry, high voltage input, tons of power options, and pit-mode. Updated to V2.

In stock

Earn 213 Points

Holybro Atlatl HV V2 5.8GHz Video TransmitterHolybro fpv banner promotion shop description mantisfpv

Holybro Atlatl HV V2 5.8GHz Video Transmitter

The original Atlatl was an excellent VTX for many users, it performed well, however some design choices led to issues for some such as the antenna mounting direction. Holybro has gone ahead and changed a few key elements to make this VTX a serious contender for your quad. The tiny button is now larger and easier to press, the MMCX connector is now facing outwards, and it now goes all the way up to 800mW for those who are cruising freestyle. Some much-appreciated changes!

Features

  • Compatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.
  • Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.
  • SmartAudio input allows remote control by the flight controller (where supported). Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.
  • All parameters art controllable via push-button on the side of the unit, for a case where SmartAudio is not used.
  • LED Indicators of Channel, Band and Power. Allow easily check VTX Parameters by glancing at the quad.
  • Variable transmit power from 25 mW to 800 mW. Use 25 mW for a race and then easily switch to 800 mW for freestyle.
  • 0.5mW Ture Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.
  • Built-in Microphone, so you can listen to your motors while you fly, no matter how far away you fly.
  • Standard 36mm form factor allows you to mount the Atlatl directly in your flight controller stack.
How to change the power and Channel?

If you are using it with a Betaflight Flight Controller built-in Betaflight OSD, you can manage the Atlatl’s transmit power and Channel from within OSD. For more details about operation steps, pls read the manual.

Channel-Change Button:

The Atlatl is intended to be configured via Telemetry. If you can not use Telemetry, you can change channels by using the Button built on the surface of VTX. The button is intended only as a fallback option for when Telemetry is not available. It would be very tedious to use the button as the primary means of configuring the Atlatl.

1. Hold the button down for 2 seconds to switch from Telemetry Mode to Button Mode.
2. Then press the button one time to change to the next channel. There is no separate ” Band” and ” Channel” function. The Atlatl will simply step through all 40 Channels that it supports.

Pit Mode: (0.5mW)

1. You can use the Betaflight OSD. In the VTX control section of the OSD ( Look at manual). There is an option, ” Pit”, which can be on or off. Manually change this option to put it into and take it out of, pit mode.
2. You can also can down the Atlatl’s button while you plug in the battery. This will make Atlatl power up in Pit Mode. Remember to take it out of pit mode before flying, if not, you will lose the sign.

Specifications

  • Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW
  • Audio: 6.5 MHz Mono
  • Antenna Connector: MMCX
  • Input Voltage: 7 to 28 volts (2-6S LiPo) with absolute maximum 42 volts
  • Dimensions: 35x25x7mm (Includes USB height)
  • Mounting Holes: Standard 30.5mm square to the centre of holes
  • Weight: 9.3g

Includes

  • 1x FPV Transmitter Board
  • 1x 80mm Female SMA–MMCX Cable
  • 1x wiring

holybro atlatl hv v2 5 8ghz video transmitter mantisfpv

Reviews

There are no reviews yet.

Be the first to review “Holybro Atlatl HV V2 5.8GHz Video Transmitter”

Your email address will not be published.

Price Match Challenge

If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

  • Such as - https://www.mantisFPV.com.au/some-product/
  • Accepted file types: jpg, jpeg, png, pdf, webm, Max. file size: 20 MB.
    20MB limit, valid image files only.

MantisFPV is the best place to buy Holybro Atlatl HV V2 5.8GHz Video Transmitter online.

Our stock levels

Are accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.

Pricing

We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, click on the “Price Match Request” tab on this page.

Same day shipping

Orders received before 2pm on weekdays are processed and shipped that very day.

Local Pickup

Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW.

Australian owned and operated

Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Help keep our profits within our shores. Heck, who can really tollerate deliveries that takes 3 months?!

Shocker!… we have running costs

Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay for wages, rent, taxes and the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

0
    0
    Your Cart
    Your cart is emptyReturn to Shop

      Appease your FPV addiction with 5% off...

      Simply sign up to our newsletter for FPV DEALS, and we'll send you a 5% off your first order CODE via email.

      LEGEND! But we need to make sure you're not a ROBOT first. Please confirm your email by clicking on the confirmation link in the email.

      Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.