iFlight Beast Whoop F7 AIO 45A (MPU6000 25.5×25.5)

$119.95

Or 4 fortnightly payments of $29.99 with Afterpay More info

iFlight Beast Whoop F7 AIO 45A (MPU6000 25.5×25.5)

3 in stock

iFlight Beast Whoop F7 AIO 45A (MPU6000 25.5×25.5)

iFlight BEAST series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work.This could only be achieved by using BGA chip sets instead of ordinary QFP (big size) MCUs and ultra powerful Mosfets for almost any build. Solder your motor wires on and let’s go! DJI Plug & Play plug and so many UARTs most people wouldn’t even use em’ all. Compatible to digital and analog FPV, onboard Barometer for possible long range flights and much more. Unleash the beast!

iflight fpv banner promotion shop description mantisfpv

iFlight Beast Whoop F7 AIO 45A (MPU6000 25.5×25.5)

Features

  • Vista digital system Plug-and-Play (VBAT passthrough)
  • MCU: BGA-STM32F745, 216MHz
  • OSD: AT7456E
  • Gyro: MPU6000
  • Blackbox: 8Mb Onboard Flash
  • BEC output: 5V 2.5A
  • Barometer: BMP280

FC // Beast F7 AIO

Specifications

  • MCU: BGA-STM32F745
  • Gyro: MPU6000
  • Blackbox: 8Mb Onboard Flash
  • BEC output: 5V 2.5A
  • Barometer: BMP280
  • Connector: Micro-USB
  • OSD: AT7456E
  • FC Firmware:IFLIGHT_F745_AIO
  • Mounting pattern: 25.5*25.5mm φ3mm
  • Dimensions: 32.5*32.5mm
  • Weight: 8.5g

ESC // 45A 2-6S

Specifications

  • Uarts: 5
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Current scale: 200
  • Constant: 45A / Burst: 50A
  • BLHeli: BLHeli-S
  • Telemetry: no
  • ESC Firmware: BlheliS G-H-30
  • Mounting pattern: 25.5*25.5mm/Φ3mm
  • Dimensions: 32.5*32.5mm

Includes

  • 1x Beast F7 AIO
  • 1x Capacitor 470uF/16V
  • 1x Capacitor 470uF/35V
  • 1x XT60 16AWG cable 100mm
  • 1x XT30U 18AWG cable 70mm
  • 1x 14AWG Silicone Cable Red 100mm
  • 1x 14AWG Silicone Cable Black 100mm
  • 1x 1.0-7P cable 50mm-28mm
  • 1x 1.0-7P cable 50mm
  • 4x M2 silicon grommets
  • 8x M2*12mm screws
  • 8x M2 Transparent Nylon Nut
  • 8x 0.8mm black Heat shrink tube 10mm

Safety reminder!

The DJI plug&play port has no voltage regulator (BEC) and is passing through VBAT. The Caddx Vista goes up to 26.4V (6S), the DJI Air Unit goes up to 17.6V (4S). Make sure not to plug-in your DJI Air Unit directly when you’re flying 6S, because this would fry it!

Small motor 4S builds should usually need an additional capacitor of at least 16V/220uF, for 6S go up to 35V or even 50V. Bigger motors have a bigger current draw, higher voltage spikes and more serious back EMF (motor braking, works like a generator). Make sure to add big enough or even bigger low ESR capacitors on the AIO battery pad or on your battery lead the more aggressive motors you fly. There’s a choice of capacitors in the package, but it’s never a bad idea to make sure to protect your board. Smaller boards have less capacitance which has to be covered with external capacitors, there’s no way around.iflight beast whoop f7 aio 45a mantisfpv 1 iflight beast whoop f7 mantisfpv iflight beast whoop f7 mantisfpv.jpg australia iflight beast whoop f7 mantisfpv.jpg flight controller esc iflight beast whoop f7 mantisfpv.jpg plug iflight beast whoop f7 mantisfpv.jpg product iflight beast whoop f7 mantisfpv.jpg specifications

Brand

Mount Size

Continuous Current

CPU

Price Match Challenge

If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

  • Such as - https://www.mantisFPV.com.au/some-product/
  • Accepted file types: jpg, jpeg, png, pdf, webm.
    20MB limit, valid image files only.

MantisFPV is the best place to buy iFlight Beast Whoop F7 AIO 45A (MPU6000 25.5×25.5) online.

Our stock levels

Are accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.

Pricing

We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, click on the “Price Match Request” tab on this page.

Same day shipping

Orders received before 2pm on weekdays are processed and shipped that very day.

Local Pickup

Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW.

Australian owned and operated

Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Help keep our profits within our shores. Heck, who can really tollerate deliveries that takes 3 months?!

Shocker!… we have running costs

Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay for wages, rent, taxes and the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

0
    0
    Your Cart
    Your cart is emptyReturn to Shop

      Appease your FPV addiction with 5% off...

      Simply sign up to our newsletter for FPV DEALS, and we'll send you a 5% off your first order CODE via email.

      LEGEND! But we need to make sure you're not a ROBOT first. Please confirm your email by clicking on the confirmation link in the email.

      Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.