iFlight Mini Stack HD (SucceX-D Mini F7+40A 20×20 ESC)

$147.29

The iFlight Mini Stack HD SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system.

Sold out

SKU: S008095 Categories: ,

Description

iFlight Mini Stack HD SucceX-D F7

The iFlight Mini Stack HD SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.But the real magic of this flight controller lies in its TWIN GYRO configuration.The TwinG uses two identical gyros oriented side by side with one offset 90 degrees from the other.

The TwinG configuration makes it the perfect FC for builds like macro quads, cinematic filming rigs and x-class racers that are a bit trickier to tune.Note, this stack works with analog builds.

iflight fpv banner promotion shop description mantisfpv

iFlight SucceX-D Mini F7 HD

Specifications

  • MCU: 216MHz STM32F722
  • Gyro:2x ICM20689
  • Blackbox:32MB
  • Betaflight OSD: YES
  • BEC: 5V 2.5A / 9V 2.5A
  • Current sensor scale: 100
  • Inverter for SBUS input (UART2-RX)
  • Smartaudio & Tramp VTX protocol supported
  • Beeper pad : Yes
  • RSSI input pad: No
  • UARTs:5
  • Motor outputs: 4
  • 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
  • 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
  • BLHeli32 Telemetry:RX5
  • Input voltage:recommended 2-6S, MAX 6S
  • Firmware: IFLIGHT_F722_TWING
  • Mounting pattern: 20*20mm φ3
  • Dimensions: 29*29mm
  • USB type-C

ESC SucceX 40A 20×20 4 IN 1 ESC

Specifications

  • MCU: STM32F051K66
  • Up tp 48kHz PWM frequency
  • Capacity: 470uF/50V
  • Current Sensor: Yes
  • Input: recommended 2-6S
  • Constant: 40A / Burst: 50A
  • BlHeli32 telemetry: Yes
  • Supports up to Dshot1200, Proshot, Oneshot, Multishot
  • Target: iFlight-BL32-4IN1
  • Weight: 7.2g
  • Mounting pattern: 20*20mm φ3mm with Grommets φ2mm
  • Dimensions: 31*31mm (including the power pads)

Includes

  • 1pc x SucceX-D F7 Mini TwinG Flight Controller
  • 1pc x SucceX Mini 40A 4in1
  • 1 x iFlight Mini Stack HD SucceX-D F7

iflight success stack f7 20x20 dji plug play mini size weight package description mantisfpv

iflight wiring diagram mini f7 mantisfpv

Additional information

Brand

Continuous Current

Mount Size

CPU

Cell Rating

, , , ,

1 review for iFlight Mini Stack HD (SucceX-D Mini F7+40A 20x20 ESC)

  1. Ryan (verified owner)

    Really sleek and simple stack, made building a small FPV a dream with amazing flight control. Would recommend!

Add a review

Your email address will not be published.

Price Match Request

If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

Name*
Such as: https://www.mantisFPV.com.au/some-product/
Accepted file types: jpg, jpeg, png, pdf, webm, Max. file size: 20 MB.
20MB limit, valid image files only.

Why Us

MantisFPV is the best place to buy the iFlight Mini Stack HD (SucceX-D Mini F7+40A 20×20 ESC) online.

Our stock levels

Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.

Pricing

We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.

Same day shipping

Orders received before 2pm on weekdays are processed and shipped that very day.

Local Pickup

Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW.

Australian owned and operated

Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Help keep our profits within our shores. Heck, who can really tolerate deliveries that takes 3 months?!

Shocker!… we have running costs

Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay for wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

Return Policy

All FPV products will generally require an RMA from the manufacturer themselves, not us.

If you feel that the products are defective, please contact the manufacturer directly.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop