FPV parts online Australia fast

iFlight Nazgul Evoque 5FD DeadCat Analog 6S BNF /w GPS

$589.95

The Secret Of Ultimate Performance Is Passion Fully protected electronics, fully illuminated, coupled with all the latest and greatest electronics we can offer.

In stock

* REQUIRED.
This drone does not come with a receiver (normally referred to as “RX“). It is the bit that talks to your remote controller. There are several protocols to pick from (we know, why so complicated?!)

If you cannot wire, solder, configure, test and bind to your remote controller (or simply can’t be bothered), we can do it for you.

Earn 1,769^ points.

Pick your receiver of choice (only if you KNOW which one you need)

Happymodel ExpressLRS Nano 2.4GHz EP1 RX

The Happymodel 2.4GHz ELRS nano series receiver has an open-source program based on ExpressLRS. Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV Racing and Long Range FPV. These are very suitable for Tiny whoops because of the ultra-light and Nano size!

Out of stock

RadioMaster R81 8CH FRSKY D8 Compatible Nano Reciever with SBUS

Out of stock

Happymodel ExpressLRS ES900RX Receiver Module 915mhz

The ES900RX module is a long-distance 915mhz wireless receiver developed and designed based on the open-source ExpressLRS software.

TBS Crossfire Nano RX (SE) - FPV Long Range Drone Receiver

TBS Crossfire nano RX for people who want to save space and solder. Full range, designed specifically for mini- and micro-quads! The Special Edition (SE) includes the TBS Immortal-T V2 Antenna!

Description

iFlight Nazgul Evoque 5FD DeadCat Analog 6S BNF /w GPS

iflight brand colour australia mantisfpv

The Secret Of Ultimate Performance Is Passion

That was the slogan for our newest approach to creating this piece of art! Fully protected electronics, fully illuminated, coupled with all the latest and greatest electronics we can offer. Months of engineering went into this BNF and all the lessons learned before, making sure that beginners, as well as experienced pilots, would fully enjoy using the new Nazgul Evoque from the first second they use it.

Lightweight Side Panels – Keep Your Rig Clean

Ever felt like a lawnmower cutting through the grass in your early days, props cutting and throwing wet grass all over and inside your flight stack? Well… These days are over! The new side panels will not only protect from wetness but also protect the internals from any strikes hitting off little components from your flight controller.

Secured Integrated XT60 Battery Plug – As Safe, It Can Be

Dangling battery plugs will ALWAYS find a way in your props, there’s always that one time you forgot to secure it properly and almost cut off the cable while flying. There was only one way to get rid of that and we think we might have found a solution. The integrated XT60 connector on the back lets you securely plug in your battery leading all cables away from your props.

High-Performance Electronics – F7 45A Power Stack

Our SucceX Mini F7 flight control, modern USB type-C plug, 16MB flash for every tuning session, and 5 UARTs for whatever equipment you might possibly wanna use. Power from the gods with our new SucceX Mini 45A ESC packed with high performance Mosfets and a whole bunch of SMD capacitors to filter out possible motor noise besides a pre-installed capacitor on the battery lead.

XING2 Performance Motors – The Best Motors Just Got Better

7075 aluminium bell, 5mm titanium alloy shaft, NSK durable bearings, Center slotted magnets for better response and lower air gaps for a higher magnetic flux with increased performance and efficiency. Not to mention the typical XING damping ring between the bell and bearing to increase durability and smoothen out your flights.

Illumination – Let It Be Green

360-degree illumination for day and night. Maybe the prettiest BNF out there but also a practical one. The bottom light indicates battery voltage, a quick check gives you a hint of the voltage still remaining; Never lift off with an empty battery again. Installed LED wires in the side panels and the bottom of the arms are also illuminated and give you some style at the next night’s race.

SucceX Force 600mW – Analog Reliable Power

Equipped with our latest 600mW Mini VTX to go far. Stable power output and fast frequency lock without interfering with other pilots when powering up. VTX telemetry built-in as well as electrical interference filters for whatever noise that might get through and an MMCX antenna connector that doesn’t hop off in wild crashes.

Specifications

  • Total Dimensions: 136*190mm (body dimension)
  • Geometry: Squashed-X or DC (DeadCat) frame available
  • Bottom to top distance: 28mm
  • Arm Thickness: 6mm
  • Bottom plate thickness: 3mm
  • Top plate thickness: 3mm
  • Upper(middle) plate thickness: 3mm
  • XING2 2207 motors (4S/6S) (LINK)
  • Nazgul F5 propellers
  • Weight: 412g (without battery and GoPro mount)

FC // BLITZ MINI F7 (LINK)

Top Features

  • BlackBox: 16MB
  • DJI Air Unit Plug-and-Play. No need to solder tiny wires.
  • BAT, +5V, 3.3, Start indicator
  • With LC filter.

Specifications

  • MCU: STM32 F722
  • Gyro: MPU6000
  • Baro: NO
  • Betaflight OSD: IFLIGHT OSD (AT7456E)
  • Blackbox:16MB
  • 5 X Uarts
  • UART1 for VTX HD/Analog
  • UART2 for Receiver
  • UART3、UART4 for GPS or 0ther sensors that require a serial port
  • UART6 for ESC Telemetry
  • 1x SH1.0 9pin connector for HD VTX/Analog VTX&CAM (5V/BAT/G/VO/T1/R1 /5V/G/VI)
  • 1x SH1.0 8pin connector for ESC(R6/CUR/M4/M3/M2/M1/BAT/G)
  • 1x SH1.0 6pin connector for Any Receiver or DJI(3V3/R2i/5V /G/R2/T2)
  • 1x SH1.0 4Pin connector GPS (T4/R4/G/5V)
  • 1x SH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V)
  • Smartaudio&IRCTramp VTX protocol supported
  • WS2812ledStrip: Yes
  • Beeper: Yes
  • Firmware: IFRC-BASEF4 4.X.X
  • Mounting: 20*20mm/φ4
  • Dimensions: 30.5*27mm
  • Weight: 5.0g

ESC // BLITZ Mini 55A (LINK)

Specification

  • Dimension: 35*42mm
  • Mounting Holes: 20*20mm/Φ4mm
  • Weight: 11.3g
  • Supports 2-6S Lipo input
  • MCU: G071
  • Constant: 55 Amps
  • Burst: 60 Amps
  • Current sensor: Yes
  • BEC: No
  • Current rate: 100
  • Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
  • Firmware: BLHeli 32
  • Target: IFLIGHT_BLITZ_G1

VTX // 5.8GHz SucceX Mini Micro 600mW VTX

  • Power: PIT/25/200/400mW/600mW
  • Antenna Interface: MMCX
  • VTX protocol: IRC Tramp
  • Output:  40 channels

Includes

  • 1x Nazgul Evoque F5D(Deadcat pattern)
  • 2x Sets Nazgul F5 Prop
  • 2 sets of Battery Pads
  • 4x Battery straps
  • 1x Screws bag
  • TPU (Colour is random)
  • 1x GPS Module
  • BNF only with DJI remote. PNP install an RX of your choice.

Note:

All iFlight BNFs are tested before shipment to guarantee the highest quality. If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. iFlight takes no responsibility for issues with DJI or Caddx 3rd party gear (Video transmitters, Goggles, Radios, etc) and must be directly reported to www.caddxfpv.com/pages/contact-us or www.dji.com/support.

iflight instagram mantisfpv

YouTube video

Additional information

Brand

Reviews

Be the first to review “iFlight Nazgul Evoque 5FD DeadCat Analog 6S BNF /w GPS”

Your email address will not be published.

Price Match Request

If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

Name*
Such as: https://www.mantisFPV.com.au/some-product/
Accepted file types: jpg, jpeg, png, pdf, webm, Max. file size: 20 MB.
20MB limit, valid image files only.

Why Us

MantisFPV is the best place to buy the iFlight Nazgul Evoque 5FD DeadCat Analog 6S BNF /w GPS online.

Our stock levels

Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.

Pricing

We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.

Same day shipping

Orders received before 2pm on weekdays are processed and shipped that very day.

Local Pickup

Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW.

Australian owned and operated

Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Help keep our profits within our shores. Heck, who can really tolerate deliveries that takes 3 months?!

Shocker!… we have running costs

Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay for wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

Loyalty Program

Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.

Return Policy

All FPV products will generally require an RMA from the manufacturer themselves, not us.

If you feel that the products are defective, please contact the manufacturer directly.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop