FPV parts online Australia fast

iFlight Protek35 HD 4S CineWhoop w/ Caddx Vista Polar Digital HD System BNF

$599.95

iFlight continue to strive to increase performance by coming up with their master Protek series. The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops!

In stock

* REQUIRED.
This drone does not come with a receiver (normally referred to as “RX“). It is the bit that talks to your remote controller. There are several protocols to pick from (we know, why so complicated?!)

If you cannot wire, solder, configure, test and bind to your remote controller (or simply can’t be bothered), we can do it for you.

Earn 1,799^ points.

Pick your receiver of choice (only if you KNOW which one you need)

Happymodel ExpressLRS Nano 2.4GHz EP1 RX

The Happymodel 2.4GHz ELRS nano series receiver has an open-source program based on ExpressLRS. Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV Racing and Long Range FPV. These are very suitable for Tiny whoops because of the ultra-light and Nano size!

Out of stock

RadioMaster R81 8CH FRSKY D8 Compatible Nano Reciever with SBUS

Happymodel ExpressLRS ES900RX Receiver Module 915mhz

The ES900RX module is a long-distance 915mhz wireless receiver developed and designed based on the open-source ExpressLRS software.

TBS Crossfire Nano RX (SE) - FPV Long Range Drone Receiver

TBS Crossfire nano RX for people who want to save space and solder. Full range, designed specifically for mini- and micro-quads! The Special Edition (SE) includes the TBS Immortal-T V2 Antenna!

Description

iFlight Protek35 HD 4S CineWhoop w/ Caddx Vista Polar Digital HD System BNF

After the very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series release, iFlight continue to strive to increase performance by coming up with their master Protek series. The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops!

iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with 2203.5 motors. It also features the Caddx Nebula Nano Digital HD System, Beast F7 AIO Flight Controller, 45A 2-6S ESC, and the Nazgul 3535 propellers.

Note: Due to DJI no longer manufacturing the DJI air unit. This version is built with the Caddx Vista Polar Digital HD System.

iflight brand colour australia mantisfpv

iFlight Protek35 HD 4S CineWhoop w/ Caddx Vista Polar Digital HD System BNF

Features

  • No Props or frame in view!
  • High-performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
  • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
  • Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
  • Low Resonance frame construction (Less Jello, more Cinematic footage)
  • Nebula Nano Digital HD System
  • Butter smooth 2203.5 3600KV (4S)
  • Pre-tuned with smooth freestyle settings

Pre-Tuned & Pre- Setup

  • Don’t worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

Specifications

  • Board Beast Whoop F7 AIO 45A
  • Motor: XING 2203.5 3600KV (4S)
  • Wheelbase: 151mm
  • Body Size: 118*94.5mmmm
  • Bottom plate thickness: 3.5mm
  • Top plate thickness: 2mm
  • Top and bottom plate spacing: 20mm (aluminum standoff height)
  • Propeller size: 3.5 inch
  • FC pattern: 25.5*25.5mm / 20*20mmmm
  • FPV cam spacing: 20mm
  • Weight: 348.3g (without battery)

FC // Beast F7 AIO

  • MCU: BGA-STM32F745
  • Gyro: MPU6000
  • UARTs: 5
  • Blackbox: 8Mb Onboard Flash
  • BEC output: 5V 2.5A
  • Barometer: BMP280
  • Connector: Micro-USB
  • OSD: AT7456E
  • FC Firmware:IFLIGHT_F745_AIO
  • Mounting pattern: 25.5*25.5mm φ3mm
  • Dimensions: 32.5*32.5mm
  • Weight: 8.5g

ESC // 45A 2-6S

  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Current scale: 200
  • Constant: 45A / Burst: 50A
  • BLHeli: BLHeli-S
  • RPM-Filter ready: Yes (JazzMaverick or JESC firmware)
  • Telemetry: no
  • ESC Firmware: BlheliS G-H-30
  • Mounting pattern: 25.5*25.5mm/Φ3mm
  • Dimensions: 32.5*32.5mm

Includes

  • 1 x ProTek35 Frame
  • 1 x Caddx Vista Polar Digital System
  • 1 x TPU Bracket for DJI Air Unit Module
  • 1 x TPU Antenna holder for DJI antenna
  • 2 x TPU camera side plate soft mount
  • 2 x Nazgul 3535 propeller (Set of 4 – Color May Vary)
  • 1 x iFlight Lipo Strap 15*150mm (Color May Vary)
  • 1 x iFlight Lipo Strap 15*250mm (Color May Vary)
  • 1 x GoPro TPU bottom stand black (GoPro Protector not included)
Note: Due to DJI no longer manufacturing the DJI air unit. This version is built with the Caddx Vista Polar Digital HD System.

mantisfpv iflight protek35 hd crossfire australia

Additional information

Brand

Reviews

Be the first to review “iFlight Protek35 HD 4S CineWhoop w/ Caddx Vista Polar Digital HD System BNF”

Your email address will not be published.

Price Match Request

If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

Name*
Such as: https://www.mantisFPV.com.au/some-product/
Accepted file types: jpg, jpeg, png, pdf, webm, Max. file size: 20 MB.
20MB limit, valid image files only.

Why Us

MantisFPV is the best place to buy the iFlight Protek35 HD 4S CineWhoop w/ Caddx Vista Polar Digital HD System BNF online.

Our stock levels

Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.

Pricing

We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.

Same day shipping

Orders received before 2pm on weekdays are processed and shipped that very day.

Local Pickup

Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW.

Australian owned and operated

Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Help keep our profits within our shores. Heck, who can really tolerate deliveries that takes 3 months?!

Shocker!… we have running costs

Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay for wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

Loyalty Program

Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.

Return Policy

All FPV products will generally require an RMA from the manufacturer themselves, not us.

If you feel that the products are defective, please contact the manufacturer directly.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop