iFlight SucceX-D Stack HD (F7 V2.1 Baro+50A 30×30 ESC)

$141.95

Or 4 fortnightly payments of $35.49 with Afterpay More info

The iFlight SucceX-D Stack HD F7 V2.1 works with DJI’s HD FPV system. Making things simpler, DJI Air unit can be plugged into the FC with included wire harness.

Sold out

SKU: FC07569 Categories: ,

iFlight SucceX-D Stack HD F7 V2.1 TwinG w/Baro 50A

The SucceX-D F7 V2.1 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.

This stack also works with analog builds.iflight fpv banner promotion shop description mantisfpv

iFlight SucceX-D Stack HD F7 V2.1 TwinG w/Baro 50A

Features

  • Universal USB Type C connector instead of micro USB
  • Plug-and-Play. No need to solder tiny wires.)
  • Supports BLHeli pass-through for easy ESC upgrade and configuration.
  • Designed to support DJI Digital FPV.

Specifications

  • MCU: 216MHz STM32F722
  • Gyro:2x ICM20689
  • Baro: YES
  • Blackbox:32MB
  • Betaflight OSD: YES
  • BEC: 5V 2.5A / 9V 2.5A
  • Current sensor scale:  100
  • Inverter for SBUS input (UART2-RX)
  • Smartaudio & Tramp VTX protocol supported
  • Beeper pad : Yes
  • RSSI input pad: No
  • UARTs:5
  • Motor outputs: 8
  • 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
  • 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
  • BLHeli32 Telemetry:RX5
  • Input voltage:recommended 2-6S, MAX 8S
  • Target:   IFLIGHT_F722_TWING
  • Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
  • Dimensions:   36*36mm
  • Weight: 7.5g
  • USB type-C

iFlight  SucceX 50A ESC

Features

  • 8 layers single-board stacking PCB board
  • 4oz 1.6mm thick power board
  • 32bit FO51K86 MCU, 48kHz maximum clock speed
  • TDK MLCC Low ESR ceramic capacitors
  • Top grade NTMFS5C430NL MOSFET

Specifications

  • MCU: STM32F051
  • Up tp 48kHz PWM frequency
  • Capacitance: 470uF/50V
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Constant: 50A / Burst: 60A
  • BlHeli32 telemetry: Yes
  • BEC: No
  • Supports up to Dshot1200, Proshot, Oneshot, Multishot
  • Target: iFlight-BL32-4IN1
  • Weight:14.4g
  • pattern: 30.5*30.5mm/Φ3mm
  • Dimensions:43x39mm(including the power pads

Includes

  • 1pc x SucceX-D F7 V2.1 TwinG Flight Controller
  • 1pc x iFlight  SucceX 50A ESC
  • 1 x iFlight SucceX-D Stack HD

iflight SUCCEX D F7 TWING V2.1 wiring diagram mantisfpv.pdf scaled

Brand

Mount Size

Cell Rating

, , , ,

Continuous Current

CPU

Reviews

There are no reviews yet.

Be the first to review “iFlight SucceX-D Stack HD (F7 V2.1 Baro+50A 30×30 ESC)”

Your email address will not be published.

Price Match Challenge

If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

  • Such as - https://www.mantisFPV.com.au/some-product/
  • Accepted file types: jpg, jpeg, png, pdf, webm, Max. file size: 20 MB.
    20MB limit, valid image files only.

MantisFPV is the best place to buy iFlight SucceX-D Stack HD (F7 V2.1 Baro+50A 30×30 ESC) online.

Our stock levels

Are accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.

Pricing

We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, click on the “Price Match Request” tab on this page.

Same day shipping

Orders received before 2pm on weekdays are processed and shipped that very day.

Local Pickup

Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW.

Australian owned and operated

Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Help keep our profits within our shores. Heck, who can really tollerate deliveries that takes 3 months?!

Shocker!… we have running costs

Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay for wages, rent, taxes and the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

0
    0
    Your Cart
    Your cart is emptyReturn to Shop

      Appease your FPV addiction with 5% off...

      Simply sign up to our newsletter for FPV DEALS, and we'll send you a 5% off your first order CODE via email.

      LEGEND! But we need to make sure you're not a ROBOT first. Please confirm your email by clicking on the confirmation link in the email.

      Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.