FPV parts online Australia fast

Matek ExpressLRS ELRS 2.4GHz ELRS-R24-D RX


ELRS has quickly become one of the most popular link system choices for many pilots, and we are excited to bring Matek’s lineup of these receivers to you. You know its quality when it’s Matek!

In stock

Earn 101^ points.
Categories: ,


Matek ExpressLRS ELRS 2.4GHz ELRS-R24-D RX

ELRS has quickly become one of the most popular link system choices for many pilots, and we are excited to bring Matek’s lineup of these receivers to you. You know its quality when it’s Matek!
Matek RGB LED BOARD 5050/12V

ELRS-R24-D Specifications

  • ESP8285, SX1280/1281IMLTRT
  • PA/LNA: SE2431L
  • Antenna connector: IPEX MHF 1
  • RF Frequency: 2.4GHz (2400~2480MHz)
  • Telemetry power: 22.5dbm~23dbm
  • SE2431L RX_gain: 12.5dB
  • Diversity (antenna-switching), default ANT2
  • Receiver protocol: CRSF
  • Input voltage: 4~9V DC @ 5V pad
  • Power dissipation:  40~45mA(before binding), 70~75mA(binding), 90~95mA(wifi mode)
  • PCB size: 21mm x 15mm
  • Weight: 3g w/ 2x antennas
  • Packing: 1x ELRS-R24-D,   2x IPEX MHF1 Antennas


Wiring to the FC

  • Receiver RX — FC UART_TX  for Telemetry
  • Receiver TX — FC UART_RX  for Control
  • Receiver 5V — FC 5V or 4v5
  • Receiver G — FC GND
  • Receiver protocol: Serial-based receiver – CRSF

Traditional Binding

  1. Power on and off your receiver three times
  2. Make sure the LED is doing a quick double blink, which indicates the receiver is in bind mode
  3. Use the [BIND] button on the Transmitter Lua script, which sends out a binding pulse
  4. The receiver will switch to a slow blink once it has received a binding pulse.
  5. Power off and power on the receiver again. If the receiver LED switch to solid on from a slow blink, it’s bound with your transmitter.


  • Receivers have ExpressLRS fw V1.1.0 preloaded without BINDING_PHRASE
  • Important: If the RX firmware has a bind phrase, the RX will never enter binding mode using the above procedure. It must be flashed without a binding phrase to do the traditional binding.

Flashing with ESP_NodeMCU-PyFlasher

  1. Connect the receiver to USB-TTL module(RX-TX, TX-RX, 5V-5V, G-GND)
  2. Connect USB to PC while pressing and holding the boot button in.
  3. open ESP_NodeMCU-PyFlasher
  4. select Serial port of USB-TTL module,  load firmware,  select “Dual Output(DOUT)”  and “Yes.wipes all data
  5. Click “Flash NodeMCU
  6. after flashing, Power off and power on your receiver, the receiver will enter binding mode(quick double blink).

Flashing with ELRS configurator

  • MATEK_2400_RX target is not available in ELRS configurator 1.0.8 and fw release 1.1.0 for now


  • 1 x ELRS-R24-D RC Receiver
  • 2 x IPEX MHF1 Antennas

Additional information



Be the first to review “Matek ExpressLRS ELRS 2.4GHz ELRS-R24-D RX”

Your email address will not be published.

Price Match Request

If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

Such as: https://www.mantisFPV.com.au/some-product/
Accepted file types: jpg, jpeg, png, pdf, webm, Max. file size: 20 MB.
20MB limit, valid image files only.

Why Us

MantisFPV is the best place to buy the Matek ExpressLRS ELRS 2.4GHz ELRS-R24-D RX online.

Our stock levels

Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.


We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.

Same day shipping

Orders received before 2pm on weekdays are processed and shipped that very day.

Local Pickup

Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW.

Australian owned and operated

Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Help keep our profits within our shores. Heck, who can really tolerate deliveries that takes 3 months?!

Shocker!… we have running costs

Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay for wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

Loyalty Program

Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.

Return Policy

All FPV products will generally require an RMA from the manufacturer themselves, not us.

If you feel that the products are defective, please contact the manufacturer directly.

    Your Cart
    Your cart is emptyReturn to Shop