BetaFPV P1 Monitor ArtLynk HD FPV Screen
AU$195.28
The P1 HD VRX Standard is a ground-based digital video receiver for the ArtLynk protocol. It takes the HD feed from a P1 air unit and puts it out over mini HDMI at 1080p60, so you can run it into a monitor, a TV or a projector. That makes it useful for training and coaching, race event monitoring, school programs and any situation where more than one person needs to see what the pilot sees. A 1/4 inch tripod nut and a built-in cooling fan mean it can sit on a stand and run all day.
ONLY 2 LEFT
Description
BetaFPV P1 Monitor ArtLynk HD FPV Screen
The BetaFPV Monitor puts a P1 HD receiver, a 4.5 inch screen and a DVR into one unit, so there is no separate VRX box to power and cable up. The 1000 nit LCD stays readable in direct sun, which is the usual failing of cheaper field monitors, and at 143g it is light enough to tripod mount or stick to a case lid. Useful for spotting, coaching, bench setup and letting someone else watch the feed while you fly.
Features
- All in one design with the receiver, display and DVR in a single unit
- 4.5 inch 1080p LCD at 1000 nits, readable in direct sunlight
- 1080p at 60fps video with low latency and 400m or more of range
- Built-in DVR recording to microSD, cards up to 1TB supported
- 143g without antennas, easy to carry, store or mount
- DC 5.5mm and XT30 power inputs, so it runs off a 2S to 6S pack straight from your flight batteries
- 1/4 inch tripod nut for stable mounting in the field
- Runs the ArtLynk protocol at roughly 60ms glass to glass latency
Specifications
- Screen size: 4.5 inch LCD
- Resolution: 1920 x 1080 at 60Hz
- Brightness: 1000 nits
- Transmission resolution: 1080p at 60fps
- Bitrate: 25Mbps
- Frequency: 5.3GHz to 5.8GHz
- Transmission range: over 400m
- EIRP: under 23dBm (FCC), under 14dBm (CE)
- SD card support: up to 1TB
- Ports: USB-C, microSD, DC 5.5 x 2.1mm, XT30
- Antenna port: RP-SMA female
- Input voltage: 5.5V to 26.4V (2S to 6S)
- Dimensions: 116 x 84.9 x 21.2mm (antennas excluded)
- Weight: 143g (antennas excluded)
About ArtLynk
ArtLynk is an open HD FPV protocol built on the Artosyn AR803X chipset, shared across multiple manufacturers rather than tied to one brand. Alongside BetaFPV’s own P1 range it works with the HGLRC Draco, TJRC VTX, and XJRC XJ3D and 02L goggles.
Includes
- 1x BetaFPV Monitor
- 2x 5.8G Antenna
- 1x Hook and loop fastener with 3M adhesive backing
- 1x User manual
Additional information
| Brands |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
-
Hawkeye Little Pilot School 4.3″ FPV Monitor Analog 5.8G 48CH
AU$129.95Sold out
-
Hawkeye Little Pilot 4 5″ FPV Monitor Analog 5.8G with DVR 108CH & Tracking Mode
AU$202.64In stock
-
Hawkeye Sharp Vision 7″ 4.9G-6G 104CH HDMI DVR FPV Monitor
AU$290.54ONLY 4 LEFT
-
Skyzone M5 FPV Monitor with DVR
AU$349.77ONLY 5 LEFT
Why Us
MantisFPV is the best place to buy the BetaFPV P1 Monitor ArtLynk HD FPV Screen online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 12pm noon (AEST) on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Reviews