Divimath SMA Bandpass Filter 5–6GHz 4 Pack
AU$88.65
The Divimath SMA Bandpass Filter is designed to protect sensitive 5.8 GHz digital and analog video receivers from overload caused by nearby high-power RF transmitters operating outside the video band.
When high-power 900 MHz or 2.4 GHz control links (250 mW and higher) are operating close to goggles or video receivers, they can desensitize or overload the RF front end, even though the video system itself operates at 5.8 GHz. This results in reduced video range, dropouts, or unstable performance.
Installed inline between the antenna and the goggle or video receiver, the Divimath bandpass filter blocks out-of-band RF energy while allowing the 5–6 GHz video signal to pass cleanly. This enables high-power control links to operate in close proximity to video receivers without degrading video performance.
ONLY 1 LEFT
Description
Divimath SMA Bandpass Filter 5–6GHz 4 Pack
The Divimath SMA Bandpass Filter is designed to protect sensitive 5.8 GHz digital and analog video receivers from overload caused by nearby high-power RF transmitters operating outside the video band.
When high-power 900 MHz or 2.4 GHz control links (250 mW and higher) are operating close to goggles or video receivers, they can desensitize or overload the RF front end, even though the video system itself operates at 5.8 GHz. This results in reduced video range, dropouts, or unstable performance.
Installed inline between the antenna and the goggle or video receiver, the Divimath bandpass filter blocks out-of-band RF energy while allowing the 5–6 GHz video signal to pass cleanly. This enables high-power control links to operate in close proximity to video receivers without degrading video performance.
Key Features
- Designed for 5–6 GHz FPV and digital video systems
- Blocks high-power out-of-band RF interference (900 MHz and 2.4 GHz)
- Prevents receiver overload and desensitization
- Inline SMA installation between antenna and receiver
- Ideal for multi-radio setups with high-power control links
Installation Notes
- Installs directly between the antenna and goggle or video receiver
- Recommended: use 90-degree SMA adapters for a low-profile, compact goggle installation
- Helps reduce mechanical strain on SMA connectors while keeping the setup clean and secure
Performance Notes
- Passband insertion loss: approximately 0.5–0.75 dB across 5.3–5.95 GHz
- For maximum antenna performance, filters may be omitted when not required
- Gain loss can be offset by using a higher-gain antenna
Includes
- 1x Divimath SMA Bandpass Filter 5–6GHz 4 Pack
Additional information
| Brands |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
-
Matek Optical Flow and Lidar Sensor 3901-L0X
AU$51.79Sold out
-
AtomRC Quick-release Servo Gimbal V2 for FPV Fixed Wing
AU$34.95Sold out
-
Plexa M2 Hex 304 Stainless Steel Button Bolts, Nut and Washer Assorted Kit (400 pack)
AU$23.87In stock
-
VIFLY GPS Mate External GPS Power Module w/ Built-In Finder 2 Buzzer
AU$21.16In stock
Why Us
MantisFPV is the best place to buy the Divimath SMA Bandpass Filter 5–6GHz 4 Pack online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 12pm noon (AEST) on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Reviews