Happymodel Analog Mobula6 1S 65mm Ultra Light Micro FPV Whoop ELRS BNF
$199.95
The Happymodel Analog Mobula6 is a 1S 65mm ultra-light micro FPV whoop with ELRS BNF, featuring an AIO flight controller, super lightweight design, high-efficiency motors, a high-quality camera, smooth performance, and compatibility with 1S Lipo/LIHV batteries.
Sold out
Description
Happymodel Analog Mobula6 1S 65mm Ultra Light Micro FPV Whoop ELRS BNF
The Happymodel Analog Mobula6 is a 1S 65mm ultra-light micro FPV whoop with ELRS BNF, featuring an AIO flight controller, super lightweight design, high-efficiency motors, a high-quality camera, smooth performance, and compatibility with 1S Lipo/LIHV batteries.
Features
- All-In-One (AIO) Flight Controller: Integrated with Serial ELRS Receiver and 5.8G OpenVTX.
- Super Lightweight Design: 1S 65mm Brushless whoop with a total weight of only 17.7g.
- High-Efficiency Motors: Equipped with the lightest brushless motors – SE0702, weighing only 1.46g each.
- High-Quality Camera: Comes with an FX17-B 1/3 CMOS 800TVL Camera for excellent footage.
- Performance: Smooth and powerful flight experience.
- Battery Compatibility: Supports 1S Lipo/LIHV batteries.
General Specifications
- Brand Name: Happymodel
- Item Name: Mobula6 2024 1S 65mm ultra-light micro FPV Whoop
- Wheelbase: 65mm
- Dimensions: 81mm x 81mm x 37mm
- Weight: 17.7g
- Options:
- V1.0: Comes with SuperX ELRS V1.0 AIO (no motor plug).
- V2.0: Features SuperX ELRS V2.0 AIO (with motor plug).
Spare Parts Specifications:
Motor:
- Model: SE0702 KV28000
- Configuration: 9N12P
- Stator Diameter: 7mm
- Stator Length: 2mm
- Shaft Diameter: Φ1mm
- Dimensions: Φ9.5mm x 14mm
- Weight: 1.46g
- Battery Compatibility: 1S only
Propellers:
- Materials: PC
- Size: 31mm
- Pitch: 0.8 in
- Weight: 0.21g
- Mount Hole Diameter: 1mm
Flight Controller:
- Model: SuperX ELRS AIO 5-IN-1
- MCU: STM32F411CEU6 (100MHZ, 512K FLASH), ESP32-PICO-D4
- Sensor: BMI270 (SPI connection)
- Mount Hole Size: 25.5mm x 25.5mm
- Power Supply: 1S battery input (DC 2.9V-4.35V)
- Built-in ESCs: 5A each, Blheli_S 4in1 ESC
- OSD: Betaflight OSD (SPI Control)
- VTX: 5.8G OpenVTX 0mw~400mw (MSP control)
- Receiver: UART ExpressLRS v3.0.0
- Voltage and Current Sensors: Built-in, with specific meter scales
Onboard 4in1 ESC:
- Power Supply: 1S LiPo/LiHV
- Current: 5A continuous, 6A peak (3 seconds)
- Firmware: Bluejay v0.19.2
- Protocol: DSHOT300
Onboard Serial ExpressLRS Receiver:
- Packet Rate Options: 50Hz/150Hz/250Hz/500Hz
- Firmware Version: V3.0
- RF Frequency: 2.4GHz
- Antenna: Enameled copper wire
- Telemetry Output Power: <12dBm
- Receiver Protocol: Serial_based CRSF
Onboard 5.8g VTX:
- Firmware Version: OPENVTX
- Channels: 40ch
- Transmitting Power: 0/RCE/25mw/100mw/400mw
- Power Supply: DC 5V
- Current (5V): <650ma
Includes
- x1 Mobula6 2024 1S 65mm Whoop Drone Frame + Canopy
- x1 SuperX ELRS AIO 5-IN-1 Flight Controller
- x4 SE0702 KV28000 Brushless Motor
- x1 Gemfan 1208-3 31mm Tri-Blade Propellers (4cw+4ccw)
- x1 FX17-B 1/3 CMOS 800TVL Camera NTSC 4:3
- x1 Onboard 5.8G 25mw~400mw VTX
- x1 Spare Canopy
- x1 Propeller Disassemble Tool
- x1 Screw Driver
Binding
- ELRS binding video, download here!
Additional information
| Brand |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
-
Sale
RadioMaster Zorro ELRS Radio Controller Limited Edition (no batteries)
Original price was: $249.95.$199.95Current price is: $199.95.In stock
-
RadioMaster LED Gimbal Light Mod Set for TX16S & Boxer (blue & white)
$25.30In stock
-
GAONENG GNB LiHV 6S 22.8V 1850mAh 120C XT60 LiPo Battery
$59.95ONLY 5 LEFT
-
VIFLY WhoopStor 3 1S Battery Storage Charger and Discharger
$56.20In stock
Why Us
MantisFPV is the best place to buy the Happymodel Analog Mobula6 1S 65mm Ultra Light Micro FPV Whoop ELRS BNF online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 1pm on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Trade Accounts
If you run a business (government or private) or just a one-person media agency, consider applying for a MantisFPV trade account.
Reviews