HappyModel Mobula7 80mm 2S Whoop O4 ELRS
AU$439.95
The Happymodel Mobula7 O4 micro FPV whoop comes out now . It comes with the new DJI O4 air unit which would provide excellent and unbelievable FPV footage. And the new Happymodel RS1102 KV10000 motor and HQPROP 45mm propellers ,bring a powerful and smooth flying experience. This would be a good option for indoor and backyard FPV flying.
ONLY 2 LEFT
Description
HappyModel Mobula7 2S Whoop O4 ELRS
The Happymodel Mobula7 O4 micro FPV whoop comes out now . It comes with the new DJI O4 air unit which would provide excellent and unbelievable FPV footage. And the new Happymodel RS1102 KV10000 motor and HQPROP 45mm propellers ,bring a powerful and smooth flying experience. This would be a good option for indoor and backyard FPV flying.
Features
- Equipment with New DJI O4 air unit
- 2S battery support Powerful and Smooth freestyle flying
- UART ExpressLRS receiver support stable control link
- Lighter and small for indoor FPV
Specifications
Motor – RS1102 KV10000
- Configuration: 9N12P
- Stator Diameter: 11 mm
- Stator Length: 2 mm
- Shaft Diameter: 1.5 mm
- Motor Dimensions: 13.5 mm × 14 mm
- Weight: 2.8 g
- Battery Support: 1–2S LiPo
Propellers
- Weight: 0.25 g
- Material: Polycarbonate
- Pitch: 0.9
- Diameter: 45 mm
- Hub Thickness: 5 mm
- Shaft Hole: 1.5 mm
Flight Controller
- MCU: STM32F405RGT6 (168 MHz, 1 MB Flash)
- Gyro Sensor: BMI270 (SPI)
- Mounting Hole Size: 25.5 mm × 25.5 mm
- Power Input: 1–2S battery (DC 2.9–8.7 V)
- Integrated ESC: 12 A (each), BLHeli_S 4-in-1
- Integrated Receiver: Serial ExpressLRS 2.4 GHz
- Barometer: BMP280
- Blackbox: 8 MB
- Voltage Sensor Scale: 110
- Current Sensor Scale: 470
4-in-1 ESC (Onboard)
- Power Input: 1–2S LiPo / LiPo HV
- Current: 12 A continuous / 15 A peak (3s)
- Firmware Support: BLHeli_S Bluejay
- Factory Firmware: Bluejay ESC V0.19
- Firmware Target: Z-H-30
- Default Protocol: DSHOT300
- Note: When using 1S with high KV 0702/0802 motors, set startup power to 1100–1200
Onboard ExpressLRS 2.4 GHz Receiver
- Packet Rate Options: 25 / 50 / 150 / 250 / 500 Hz
- Frequency: 2.4 GHz
- Antenna: 31 mm enameled copper wire
- Telemetry Output Power: <12 dBm
- Firmware Version: ExpressLRS V3.0.1
- Firmware Target: HappyModel EP2400 RX
- Firmware Update: Via ExpressLRS Configurator
DJI O4 Air Unit
- Weight: Approx. 8.2 g (with camera module)
- Transmission Module Dimensions: 30 × 30 × 6 mm
- Camera Module Dimensions: 13.44 × 12.36 × 16.50 mm
- Cable Lengths:
- Camera: 50 mm
- Coaxial: 50 mm
- 3-in-1: 50 mm
- Operating Frequencies:
- 5.170–5.250 GHz
- 5.725–5.850 GHz (region-dependent)
- Transmitter Power (EIRP):
- 5.1 GHz: <23 dBm (CE)
- 5.8 GHz:
- <30 dBm (FCC)
- <14 dBm (CE)
- <30 dBm (SRRC)
- Live View Quality: 1080p @ 30/50/60/100 fps
Includes
- Happymodel M80 Frame: ×1
- CrazyF4HD ELRS Flight Controller (Firmware Target: BETAFLIGHTF4): ×1
- RS1102 KV10000 Brushless Motor: ×4
- HQProp 45mm x2 Bi-Blade Propellers (4 CW + 4 CCW): ×1 set
- DJI O4 Air Unit: ×1
- Canopy: ×1
- Screwdriver: ×1
Additional information
| Brands |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
-
Happymodel Mobula6 Freestyle HD BNF Built-in HDZERO AIO5 flight controller ELRS 2.4G
AU$353.39Sold out
-
GEPRC Vapor X5 Cinematic Quadcopter ELRS 2.4G DJI O4 PRO
AU$839.95Sold out
-
Flywoo Firefly18 1S V3 Nano Baby V3 O4 Tiny Drone ELRS
AU$422.53Sold out
-
Flywoo Flytimes 85 HD Walksnail 2S Micro FPV Drone ELRS
AU$485.15ONLY 2 LEFT
Why Us
MantisFPV is the best place to buy the HappyModel Mobula7 80mm 2S Whoop O4 ELRS online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 12pm noon (AEST) on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Trade Accounts
If you run a business (government or private) or just a one-person media agency, consider applying for a MantisFPV trade account.
Reviews