HGLRC Rekon 35 Nano Long Range Analog FPV Drone 18650 BNF ELRS 2.4G
AU$286.87
The Rekon35 is all about simplicity and convenience! This tiny quad is designed around a single, standard 18650 Lithium-Ion cell.
ONLY 1 LEFT
Description
HGLRC Rekon 35 Nano Long Range Analog FPV Drone 18650 BNF ELRS 2.4G
The Rekon 3.5 is what I always wanted the original #MicroLongRage to be; Sub 250g and powered by a 2S Li-Ion!
Two years ago, the components to make such a concept work properly just weren’t available: Electronics were not running reliably when the power supply dropped below 5V, efficient motor-prop combos with the right size weren’t available and building DIY 2S Li-Ion packs was laborious. But the FPV industry has made a stunning amount of progress and today, with the support of HGLRC the Rekon 3.5 is finally making it happen. You can simply use cheap off-the-shelf 18650 batteries and the electronics are so reliable that in an emergency you can empty the Li-Ion batteries way below the recommended voltage without any impact on the FPV video feed and radio control link.
Dave C_FPV
Note:
- Battery type and condition, as well as environmental temperature, can affect the performance of the quad, high c-rated cell is required, we recommend Sony VTC6 or similar.
- When the power of the battery cannot fulfill the working requirements of the ESC or VTX, it may stop working. Long periods of full-throttle flight should be avoided. Try to lower your throttle if your VTX blacks out. We recommend stopping flying at 2.8-3.2V.
- Please try not to drain the battery out to avoid accidents when flying. Any crashes caused by the low voltage of the batteries are not related to the quality of the product.
Specifications
- Frame：Rekon 35 Long Range Frame
- FC：HGLRC SPECTER 15A ELRS AIO
- MCU：STM32F411
- GYRO：MPU6000
- FC Firmware：ZEUSF4EVO
- Continuous current：15A
- Peak curren：18A（10 Sec）
- Input voltage:2S 7.4V
- ESC Firmware：Q-H-50 （Bluejay）
- VTX：Zeus nano VTX 350mW / CADDX POLAR VISTA
- Motor：SPECTER 1303.5 5500KV(2S)
- GPS：M80 GPS
- Propeller：GEMFAN 3520 3.5-inch 3-blades propeller
- Wheelbase：160mm
- Size：150mm*155mm
- Weight：123.4g
- HD Weight：140.6g
Includes
- 1x Rekon 35 Drone
- 8x GEMFAN 3520 3.5-inch 3-blades propeller
- 1x M3*20 stainless steel screw
- 10xM2*7stainless steel screw
- 1xAnti loosening self-locking M3 nut
- 1x receiver ELRS
Recommended battery:
- 2x 18650-3000mAh
Additional information
| Brands |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
-
SpeedyBee TX800 800mW Video Transmitter + 5.8GHz RHCP Antenna V2 SMA Combo
AU$72.75Sold out
-
VIFLY ToothStor 4 Port 2S Balance Charger with Storage Mode (BT3.0 & JST-XH2.54)
AU$63.52In stock
-
SpeedyBee Nano 2.4G ExpressLRS ELRS Receiver
AU$20.75Sold out
-
JHEMCU F745 AM32 60A Stack 30x30mm (ICM42688)
AU$155.45ONLY 2 LEFT
Why Us
MantisFPV is the best place to buy the HGLRC Rekon 35 Nano Long Range Analog FPV Drone 18650 BNF ELRS 2.4G online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 12pm noon (AEST) on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Trade Accounts
If you run a business (government or private) or just a one-person media agency, consider applying for a MantisFPV trade account.
Reviews