Plexa Power Ammeter Colour Screen with Temperature and Humidity Sensor
AU$39.95
A power meter that measures current in both directions, so you can monitor charging and discharging without turning the unit around. The 1.47 inch rounded colour screen runs at 320×172 and shows voltage, current, temperature and humidity together with warning and alarm states.
In stock
Description
Plexa Power Ammeter Colour Screen with Temperature and Humidity Sensor
A power meter that measures current in both directions, so you can monitor charging and discharging without turning the unit around. The 1.47 inch rounded colour screen runs at 320×172 and shows voltage, current, temperature and humidity together with warning and alarm states. A thickened 1mΩ sampling resistor and copper busbar handle 30A continuous and up to 80A instantaneous, and the built in high precision temperature and humidity sensor gives you real time ambient readings while you work. At 68mm long including the plugs it stays out of the way on the bench or in the field. Also included is XT90 adaptors for those running larger packs.
Features
- Bidirectional current measurement for charge and discharge testing
- 1.47 inch rounded bezel colour screen, 320×172 resolution
- Built in high precision temperature and humidity sensor
- Thickened 1mΩ sampling resistor and copper busbar
- Multiple detection and alarm functions with clear status codes
- Colour coded warnings for over voltage, over current, high temperature and high humidity
- XT60 male and female connectors
- XT90 connector adaptors included
- Compact 68mm body that fits inline with your existing setup
Specifications
- Model: Plexa Power Ammeter
- Input/Output Interfaces: XT60 male and female connector
- Detection Type: DC
- Detection Voltage Range: 5V to 34V
- Rated Current: 30A continuous
- Maximum Instantaneous Current: 80A
- Start-up Voltage: 4.5V
- Maximum Withstand Voltage: 36V
- Temperature Detection Range: 0°C to 80°C
- Humidity Detection Range: 0 to 100% RH
- Display: 1.47 inch colour screen, 320×172
- Dimensions: 68 x 23.5 x 11.6mm (including plugs)
What You Can Use It For
- Checking current draw at hover and full throttle on a test stand
- Comparing motor and prop combinations on the same frame
- Verifying your charger is putting the claimed capacity into a pack
- Capacity checking used packs to see if they are still worth flying
- Watching voltage sag under load rather than resting voltage
- Live readout for anything running off XT60 on the bench
Screen Codes
| RUN | Running normally |
| CAU | Warning status |
| ERR | Device error |
| SE | Sensor error, temperature or current sensor fault |
| LV | Low voltage, below 5V |
| OV | Over voltage, above 34V |
| OC | Over current, above 30A |
| HT | High temperature, above 50°C |
| OR | Over range, temperature sensor below 1°C or above 80°C |
| VP | Voltage range percentage, turns red above 34V |
| RH | Current humidity, turns blue above 70% |
| °C | Current temperature, turns red above 50°C |
| ! | Warning symbol, over voltage or over current |
Notes
- Readings below 10mA display as NULL. Above 10mA the meter displays normally.
- Check polarity before connecting. Reversed polarity will damage the meter.
- Switch off the supply and load before plugging or unplugging. Do not hot swap.
- The unit can get warm in use. Avoid touching the body during high current testing.
Includes
- 1x Plexa Power Ammeter Colour Screen with Temperature and Humidity Sensor
Additional information
| Brands |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Why Us
MantisFPV is the best place to buy the Plexa Power Ammeter Colour Screen with Temperature and Humidity Sensor online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 12pm noon (AEST) on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Reviews