FPV parts online and in-store. Sydney rules!
Contact Us

RadioMaster RP3-H ExpressLRS 2.4GHz Nano Receiver

RadioMaster RP3-H ExpressLRS 2.4GHz Nano Receiver
RadioMaster RP3-H ExpressLRS 2.4GHz Nano Receiver - Image 2
RadioMaster RP3-H ExpressLRS 2.4GHz Nano Receiver - Image 3

AU$38.74

Designed specifically for use with our Nexus Helicopter Flybarless control unit and compatible with all CRSF/S.BUS enabled flight controllers the RP3-H ExpressLRS receiver comes with a built-in TCXO and an integrated housing design that makes the receiver tougher and ready to mount in modern helicopter frames. With the RP3-H receiver, you can get reliable, stable, and accurate signal reception, which enhances your flight experience and allows for superior performance even in demanding environments. The RP3-H also features an Ext-V telemetry input for compatibility with older ESCs that do not provide battery voltage telemetry via the control unit.

Sold out
Price Match Request
SKU: MF-2842571657 Category:

Description

RadioMaster RP3-H ExpressLRS 2.4GHz Nano Receiver

Designed specifically for use with our Nexus Helicopter Flybarless control unit and compatible with all CRSF/S.BUS enabled flight controllers the RP3-H ExpressLRS receiver comes with a built-in TCXO and an integrated housing design that makes the receiver tougher and ready to mount in modern helicopter frames. With the RP3-H receiver, you can get reliable, stable, and accurate signal reception, which enhances your flight experience and allows for superior performance even in demanding environments. The RP3-H also features an Ext-V telemetry input for compatibility with older ESCs that do not provide battery voltage telemetry via the control unit.

The RP3-H receiver uses the Skyworks SKY66112 power amplifier to increase telemetry performance, the PA provides up to 100mw of telemetry power, and antenna switching for antenna diversity. It is developed around the ESP8285 MCU and SX1281IMLTRT RF Chip, offering Lora and FLRC 2.4GHz RF links that provide incredible range and low latency. With Wifi built-in, firmware updates can be done on your craft without the need to remove the receiver.

radiomaster logo brand syntegra australia 768x203 1

Features

  • Perfect for helicopters and any application that needs a rugged cased serial receiver
  • Plug’n’play solder free RP3-H ExpressLRS receivers compatible with NEXUS Heli flight controller
  • Optimized PCB design for better heat dissipation
  • LNA for better receiver range
  • PA for better telemetry range
  • Antenna Diversity for improved signal stability and range
  • Built-in a TCXO (temperature compensated crystal oscillator)
  • Automatically detects voltage telemetry of external battery voltage or receiver battery/ESC BEC voltage
  • Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS

Specifications

  • Item: RP3-H ExpressLRS 2.4GHz Nano Receiver
  • Type: ISM
  • MCU: ESP8285
  • RF Chip: SX1281
  • Telemetry RF power: Max 100mW
  • Antenna: 150mm 2.4GHz Antenna x2
  • Frequency Range: 2.404 – 2.479 GHz
  • Maximum receive refresh rate: 500Hz / F1000Hz
  • Minimum receiver refresh rate: 25Hz
  • Working voltage: DC 4.5 – 8.4V
  • Battery voltage detection range: DC 4.0 – 35V
  • Weight: 5.1g (Including two antenna)
  • Dimension: 28mm*24mm*8mm
  • Firmware Version: ExpressLRS v3.3.1 pre-installed
  • FW Target: RadioMaster RP3-H Diversity 2400 RX
  • Bus interface: CRSF/S.Bus

Package Includes

  • 1x RP3-H ExpressLRS 2.4GHz Nano Receiver
  • 2x 150mm IPX1 2.4GHz T Antenna (installed)
  • 1x JST-GH CRSF 4 wire Pigtail
  • 1x JST-GH 4 wire to JST-GH CRSF cable
  • 1x JST-GH 4 wire to single Servo pin (single dupont connectors)
  • 1x Voltage telemetry wire
  • 1x Quick start guide

radiomaster rp3 h expresslrs nano receiver mantisfpv australia product drone fpv plugs description 01 radiomaster rp3 h expresslrs nano receiver mantisfpv australia product drone fpv plugs description 02 radiomaster rp3 h expresslrs nano receiver mantisfpv australia product drone fpv plugs description 03 radiomaster rp3 h expresslrs nano receiver mantisfpv australia product drone fpv plugs description 04 radiomaster rp3 h expresslrs nano receiver mantisfpv australia product drone fpv plugs description 06 radiomaster rp3 h expresslrs nano receiver mantisfpv australia product drone fpv plugs description 07 radiomaster rp3 h expresslrs nano receiver mantisfpv australia product drone fpv plugs description 09 radiomaster rp3 h expresslrs nano receiver mantisfpv australia product drone fpv plugs description 10

Additional information

Brands

Reviews

Be the first to review “RadioMaster RP3-H ExpressLRS 2.4GHz Nano Receiver”

Your email address will not be published. Required fields are marked *

 

Price Match Request

 

If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Name*
Such as: https://www.mantisfpv.com.au/some-product/
Accepted file types: jpg, jpeg, png, pdf, webm, Max. file size: 20 MB.
20MB limit, valid image files only.

Related products

Why Us

MantisFPV is the best place to buy the RadioMaster RP3-H ExpressLRS 2.4GHz Nano Receiver online.

Our stock levels

Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.

Pricing

We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.

Same day shipping

Orders received before 12pm noon (AEST) on weekdays are processed and shipped that very day.

Local Pickup

Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.

Australian owned and operated

Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!

Shocker!… we have running costs

Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

Loyalty Program

Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping