SEQURE E130 AM32 130A 4-12S 4in1 ESC 30×30
AU$250.84
The SEQURE E130 G2 is a 4in1 ESC built for high voltage, high current builds. It runs an STM32G071 32-bit processor on AM32 firmware, takes anything from 4S to 12S, and handles 130A continuous per channel with 220A peaks. That puts it well past the usual 6S class hardware and into cinelifter, long range and heavy lift territory.
ONLY 2 LEFT
Description
SEQURE E130 G2 AM32 130A 4-12S 4in1 ESC 30×30
The SEQURE E130 G2 is a 4in1 ESC built for high voltage, high current builds. It runs an STM32G071 32-bit processor on AM32 firmware, takes anything from 4S to 12S, and handles 130A continuous per channel with 220A peaks. That puts it well past the usual 6S class hardware and into cinelifter, long range and heavy lift territory.
Power comes in through a dual pad design with the battery pads in parallel, which makes soldering 8AWG a lot less painful and spreads the current across more copper. The board itself uses a multi-layer PCB with extra thick copper and an onboard copper bar to carry current and pull heat away from the FETs. Low resistance MOSFETs keep conversion losses down, and tight switching interval control keeps the ESC responsive without desync under load.
A built in ammeter feeds telemetry back to the flight controller, so motor RPM, temperature and current all show up live. The ESC detects your throttle signal on power up and supports all DShot rates plus PWM, Oneshot and Multishot. Motor timing, throttle calibration, current sensing, motor direction and telemetry can all be set through the AM32 configurator. Standard 30.5×30.5mm mounting.
Note: the onboard BEC is 16V 2A. If you are running a 12S pack with a 4-8S flight controller, the FC must be powered from the 16V BEC output.
Specifications
- Model: SEQURE E130 G2
- Processor: STM32G071 32-bit
- Firmware: AM32
- Input voltage: 4-12S (14-53V) LiPo / LiHV
- Continuous current: 130A per channel
- Peak current: 220A per channel
- BEC output: 16V 2A
- Signal protocols: DShot (all), PWM, Oneshot, Multishot
- Telemetry: Yes
- Current sensor: Yes
- Mounting: 30.5×30.5mm, ø4mm / M3
- Size: 54 x 57 x 7mm
- Weight: 43g
Includes
- 1x SEQURE E130 G2 4in1 ESC
- 2x 63V 1200uF electrolytic capacitor
- 1x XT90H-M male connector
- 5x M3x10mm shock absorbing washer (black)
- 1x 30AWG 40mm reverse double headed SH1.0-8P flat cable
- 2x 8AWG 150mm power cable (black/red)
Additional information
| Brands |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
Why Us
MantisFPV is the best place to buy the SEQURE E130 AM32 130A 4-12S 4in1 ESC 30×30 online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 12pm noon (AEST) on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Reviews