The SEQURE T55 is a compact preheating hot plate for PCB work, with a 55x55mm aluminium heating surface and an adjustable range of 50°C to 280°C. It’s the tool you want when you’re pulling a burnt FET off a 4in1 ESC, reflowing a lifted pad, or swapping LED beads, since preheating the board from underneath means far less time with an iron on the joint and much less risk of cooking the surrounding components.

Sequre T55 Smart Mini Constant Temperature Adjustable Soldering Hot Plate

The SEQURE T55 is a compact preheating hot plate for PCB work, with a 55x55mm aluminium heating surface and an adjustable range of 50°C to 280°C. It’s the tool you want when you’re pulling a burnt FET off a 4in1 ESC, reflowing a lifted pad, or swapping LED beads, since preheating the board from underneath means far less time with an iron on the joint and much less risk of cooking the surrounding components.

Heat is handled by a high quality aluminium plate for fast, even transfer, with an aluminium radiator behind an insulating layer to pull heat away from the control board. A ceramic temperature sensor keeps readings accurate through long sessions at high temperature, and the control algorithm applies temperature compensation and power adjustment to hold the setpoint. Run off a 65W PD supply at around 25V it goes from 30°C to 280°C in roughly 87 seconds.

Settings are shown on a 128×32 OLED with two buttons on the back, and a buzzer signals working status. There’s a timed heating mode that stops automatically once the set time is reached, plus auto sleep, °C/°F switching, menu language selection and firmware updates. A slip resistant silicone base keeps it planted on the bench.

This version ships with a 65W PD adapter fitted with an Australian plug, so it’s ready to run out of the box with no travel adapter needed. It’ll also take power from a USB-C PD or QC supply, a power bank, or a LiPo via a suitable XT60 to Type-C lead, which makes it usable in the field as well as on the bench.

Note: a hot plate is a burn hazard. Treat it like an open flame, don’t leave it unattended while heating, and switch it off and store it out of reach of children when you’re done.

Specifications

• Model: T55
• Heating area: 55 x 55mm
• Working temperature: 50°C to 280°C (122°F to 536°F)
• Maximum voltage: 25V
• Maximum power: 95W
• Recommended voltage: 19V to 25V
• PD power supply: PD 20V, 3A or higher
• Power supply modes: PD, QC, DC
• Interface: USB Type-C
• Display: 128 x 32 OLED
• Menu languages: English, Chinese, Russian
• Size: 55 x 60 x 37mm
• Weight: 92g

Includes

• 1x SEQURE T55 Hot Plate
• 1x 65W PD power supply (AU plug)
• 1x 100W 5A fast charging USB-C cable