FPV parts online and in-store. Sydney rules!
Contact Us

SpeedyBee F405 Mini BLS 35A 20×20 Stack

speedybee f405 mini bls 35a 20x20 stack mantisfpv australia product display e1698884536527
speedybee f405 mini bls 35a 20x20 stack mantisfpv australia product
speedybee f405 mini bls 35a 20x20 stack mantisfpv australia product flight controller
speedybee f405 mini bls 35a 20x20 stack mantisfpv australia product display fc board
speedybee f405 mini bls 35a 20x20 stack mantisfpv australia product display esc board
speedybee f405 mini bls 35a 20x20 stack mantisfpv australia product display esc board pads

$119.95

Introducing the SpeedyBee F405 Mini BLS 35A 20×20 Stack, a powerful and compact flight controller and ESC stack designed to elevate your drone’s performance. With its impressive features, this stack is your key to an enhanced flying experience.

ONLY 4 LEFT

Earn 359^ points.
Add to Wishlist
Price Match Request
SKU: MF-3344414696 Category:

Description

SpeedyBee F405 Mini BLS 35A 20×20 Stack

Introducing the SpeedyBee F405 Mini BLS 35A 20×20 Stack, a powerful and compact flight controller and ESC stack designed to elevate your drone’s performance. With its impressive features, this stack is your key to an enhanced flying experience.

speedybee logo brand banner australia mantisfpv

Features

  • Flight Controller: SpeedyBee F405 Mini
  • ESC: SpeedyBee BLS 35A Mini V2 4-in-1 ESC
  • Bluetooth: Supported. Used for connecting with the SpeedyBee App for flight controller and ESC parameter configuration. Ensure the MSP switch on UART 4 is on, and set to a baud rate of 115200, or Bluetooth functionality won’t be available.
  • WiFi: NOT Supported
  • Wireless FC Firmware Flashing: NOT Supported
  • Wireless Blackbox Download & Analysis: NOT Supported
  • Power Input: 3-6S LiPo
  • Mounting: 20 x 20mm with 3.5mm hole size, compatible with M2 and M3 screws/Silicone grommets
  • Dimensions: 32mm(L) x 35mm(W) x 14.2mm(H)
  • Weight: 13.5g
  • Battery indicator

Specifications

SpeedyBee F405 V3 30×30 Flight Controller

  • MCU: STM32F405
  • IMU (Gyro): ICM42688P
  • USB Port Type: Type-C
  • Barometer: Built-in
  • OSD Chip: AT7456E chip
  • BLE Bluetooth: Supported for connecting with the SpeedyBee App. Ensure MSP switch on UART 4 is on, set to a baud rate of 115200.
  • Wireless FC Firmware Flashing: NOT Supported. Use Betaflight configurator on PC for firmware update.
  • Wireless Blackbox Download & Analysis: NOT Supported. Use Betaflight configurator on PC for blackbox analysis.
  • WiFi: Not supported
  • DJI Air Unit Connection Way: Direct soldering
  • DJI Air Unit Compatibility: Compatible with DJI Air Units: DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1. Solder pads < 9V, G, T1, R1, G, SUBS(R2) > for connection with DJI Air Unit.
  • Blackbox: 8MB Onboard Flash
  • BetaFlight Camera Control Pad: Yes (CC pad on the front side)
  • Current Sensor Input: Supported. For SpeedyBee BLS 35A V2 ESC, set Scale=250 and Offset=-500.
  • Power Input: 3-6S LiPo through G, V wires of 8-pin harness or G, V pads from the bottom side.
  • 5V Output: 4 groups of 5V output, three +5V pads, and 1 BZ+ pad (used for Buzzer) on the front side. Total current load is 2A.
  • 9V Output: 1 group of 9V output, one +9V pad on front side. Total current load is 3A.
  • 3.3V Output: Supported. Soldering pad named ‘3V3’ on the front top of the flight controller. Designed for 3.3V input receivers. Up to 500mA current load.
  • 4.5V Output: Supported. Designed for radio receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load.
  • ESC Signal: M1 – M4 wires or soldering pads on the bottom side.
  • UART: 6 sets (UART1, UART2, UART3, UART4 (Dedicated for Bluetooth connection)), UART5 (Dedicated for ESC telemetry), UART6
  • ESC Telemetry: UART R5 (UART5)
  • I2C: Supported. DA & CL pads on the front side. Used for magnetometer, sonar, etc.
  • Traditional Betaflight LED Pad: Supported. 5V, G, and LED pads on the bottom of the front side. Used for WS2812 LEDs controlled by Betaflight firmware.
  • Buzzer: BZ+ and BZ- pads used for 5V Buzzer
  • BOOT Button: Supported. Press and hold BOOT button and power the FC on at the same time to force the FC into DFU mode for firmware flashing when the FC gets bricked.
  • RSSI Input: Not Supported
  • Smart Port / F.Port: Not Supported
  • Supported Flight Controller Firmware: BetaFlight (Default), INAV
  • Firmware Target Name: SPEEDYBEEF405MINI
  • Mounting: 20 x 20mm with 3.5mm hole diameter, compatible with M2 and M3 screws/Silicone grommets.
  • Dimensions: 30(L) x 32(W) x 7.8(H)mm
  • Weight: 9.6g

SpeedyBee 35A BLHeli_S Mini V2 4-in-1 ESC

  • Firmware: BLHeli_S J-H-40
  • Continuous Current: 35A * 4
  • Burst Current: 45A (5 seconds)
  • ESC Protocol: DSHOT300/600
  • Power Input: 3-6S LiPo
  • Power Output: VBAT (Battery voltage, used to power the flight controller)
  • Current Sensor: Support (Scale=250 Offset=-500)
  • ESC Telemetry: Not supported
  • Mounting: 20 x 20mm with ∅3.5mm hole size, compatible with M2 and M3 screws/Silicone grommets.
  • Dimensions: 35 * 35 * 5.5mm
  • Weight: 7.2g

Includes

  • 1x SpeedyBee F405 Mini BLS 35A 20×20 Stack

Manual

Additional information

Brand

Reviews

    Be the first to review “SpeedyBee F405 Mini BLS 35A 20×20 Stack”

    Your email address will not be published. Required fields are marked *

     

    Price Match Request

     

    If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

    "*" indicates required fields

    Name*
    Such as: https://www.mantisfpv.com.au/some-product/
    Accepted file types: jpg, jpeg, png, pdf, webm, Max. file size: 20 MB.
    20MB limit, valid image files only.
    This field is for validation purposes and should be left unchanged.

    Related products

    Why Us

    MantisFPV is the best place to buy the SpeedyBee F405 Mini BLS 35A 20×20 Stack online.

    Our stock levels

    Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
    We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.

    Pricing

    We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
    Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.

    Same day shipping

    Orders received before 1pm on weekdays are processed and shipped that very day.

    Local Pickup

    Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.

    Australian owned and operated

    Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!

    Shocker!… we have running costs

    Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

    Loyalty Program

    Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.

    Trade Accounts

    If you run a business (government or private) or just a one-person media agency, consider applying for a MantisFPV trade account.

    0
      0
      Your Cart
      Your cart is emptyReturn to Shop
      Continue Shopping