SpeedyBee F405 V3 Flight Controller 30x30mm
$64.95
Discover the SpeedyBee F405 V3 Flight Controller: your solution for advanced drone flight. With its STM32F405 MCU and BMI270 gyro, this controller delivers responsive, stable performance.
Sold out
Description
SpeedyBee F405 V3 Flight Controller 30x30mm
Discover the SpeedyBee F405 V3 Flight Controller: your solution for advanced drone flight. With its STM32F405 MCU and BMI270 gyro, this controller delivers responsive, stable performance. Setup is hassle-free with BLE Bluetooth and versatile DJI Air Unit connectivity. The board supports microSD storage for in-flight data, offers multiple voltage outputs for various components and is BetaFlight ready. Optimised for customisation with 6 UARTs and a compact design (41.6 x 39.4 x 7.8 mm; 9.6g), it’s the perfect core for your FPV racing or freestyle drone.
Specifications
- MCU: STM32F405
- IMU (Gyro): BMI270
- USB Port Type: Type-C
- Barometer: Built-in
- OSD Chip: AT7456E chip
- BLE Bluetooth: Supported for Flight Controller configuration (MSP enabled, Baud rate 115200 on UART4)
- Wi-Fi: Not supported
- DJI Air Unit Connection: Two methods supported – 6-pin connector or direct soldering
- 6-pin DJI Air Unit Plug: Compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1 without wire changes
- Blackbox: MicroSD Card Slot (Support for Standard or High Capacity cards up to 32GB, with FAT16 or FAT32 formatting)
- BetaFlight Camera Control: Yes, with CC pad on the front side
- Current Sensor Input: Supported (For SpeedyBee BLS 50A ESC, set scale = 386 and offset = 0)
- Power Input: 3S – 6S Lipo (G, BAT pins/pads from 8-pin connector or bottom side)
- 5V Output: 9 groups, total current load 2A
- 9V Output: 2 groups, total current load 2A
- 3.3V Output: Up to 500mA current load
- 4.5V Output: Up to 1A current load (supports receiver and GPS module)
- ESC Signal: M1 – M4 on the bottom, M5-M8 on the front side
- UART: 6 sets (UART1 to UART6, with dedicated UART4 for Bluetooth and UART5 for ESC telemetry)
- ESC Telemetry: UART R5 (UART5)
- I2C: Supported (SDA & SCL pads on front side)
- Betaflight LED Pad: Supported
- Buzzer: BZ+ and BZ- pad for 5V Buzzer
- BOOT Button: Supported for entering DFU mode or controlling LED strips
- RSSI Input: Supported, marked as RS on the front side
- Smart Port / F.Port: Not supported
- Supported Firmware: BetaFlight (Default), INAV (Note: DShot not supported with INAV)
- Firmware Target Name: SPEEDYBEEF405V3
- Mounting: 30.5 x 30.5mm (4mm hole diameter)
- Dimensions: 41.6(L) x 39.4(W) x 7.8(H) mm
- Weight: 9.6g
Includes
- 1x SpeedyBee F405 V3 Flight Controller 30x30mm
Manual
Additional information
| Brand |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
Why Us
MantisFPV is the best place to buy the SpeedyBee F405 V3 Flight Controller 30x30mm online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 1pm on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Trade Accounts
If you run a business (government or private) or just a one-person media agency, consider applying for a MantisFPV trade account.
Reviews