SpeedyBee F7 V3 BL32 50A 30×30 Stack
$179.95
Take your drone to new heights with the SpeedyBee F7 V3 BL32 50A 30×30 Stack – your premier choice for superior control and efficient power distribution.
ONLY 2 LEFT
Description
SpeedyBee F7 V3 BL32 50A 30×30 Stack
Take your drone to new heights with the SpeedyBee F7 V3 BL32 50A 30×30 Stack – your premier choice for superior control and efficient power distribution. This dynamic duo features the sophisticated SpeedyBee F7 V3 Flight Controller alongside the powerful SpeedyBee BL32 50A 4-in-1 ESC, crafting an integrated flight system that delivers smooth and responsive flight characteristics.
Specifications
SpeedyBee F7 V3 Flight Controller
- Product Name: SpeedyBee F7 V3 Flight Controller
- MCU: STM32F722
- IMU(Gyro): BMI270
- USB Port: Type-C
- Weight: 10.7g
- Dimensions: 41 x 38 x 8.1 mm
- Mounting: 30.5 x 30.5mm, 4mm hole diameter
- BLE Bluetooth: Supported (for FC configuration, includes 2.4 GHz Wi-Fi-and-Bluetooth combo chip)
- OSD Chip: AT7456E chip
- Barometer: BMP280
- DJI Air Unit Connection: Two ways – 6-pin connector or direct soldering
- 6-pin DJI Air Unit Plug: Compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1
- Power Input: 3S – 6S Lipo
- 5V Output: 10 groups (total current load 2A)
- 9V Output: 2 groups (total current load 4A)
- 3.3V Output: Supported (up to 500mA load)
- 4.5V Output: Supported (up to 1A load)
- Flash FC Firmware Wirelessly: Supported
- Download/Analyze Blackbox: Supported
- BetaFlight Camera Control Pad: Yes (CC pad on the front side)
- Flash (for BlackBox): 500MB
- ESC Signal Pads: M1 – M4 on bottom, M5-M8 on front
- UART Ports: 5 sets (UART1, UART2, UART3, UART4 for ESC Telemetry, UART6)
- I2C Support: Yes (SDA & SCL pads on front)
- LED Pad: For WS2812 LEDs, controlled by Betaflight firmware
- Buzzer: BZ+ and BZ- pads for 5V buzzer
- BOOT Button: Supported
- RSSI Input: Supported (RS on the front side)
- SmartPort: Supported
- Supported Firmware: BetaFlight (Default), INAV
- Firmware Target Name: SPEEDYBEEF7V3
SpeedyBee BL32 50A 4-in-1 ESC
- Product Name: SpeedyBee BL32 50A 4-in-1 ESC
- Firmware: SpeedyBee BL32 50A
- Weight: 19.2g with heat sink
- Dimensions: 45.6(L) x 40(W) x 8.8mm(H)
- Mounting: 30.5 x 30.5mm, 4mm hole diameter
- Continuous Current: 50A * 4
- Burst Current: 55A (for 5 seconds)
- Power Input: 3-6S LiPo
- Power Output: VBAT
- Current Sensor: Supported (Scale=490 Offset=0)
- ESC Telemetry: Supported
- PWM Frequency Range: 16KHz-128KHz
- TVS Protective Diode: Yes
- Heat Sink: Yes
- External Capacitor: 1000uF Low ESR Capacitor (included)
- ESC Protocol: DSHOT300/600
- Configurator Download Link: BLHeli Configurator
Includes
- 1x SpeedyBee F405 V3 BLS 50A 30×30 Stack
Manual
Additional information
| Brand |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
-
Axis Flying Argus Mini Stack F722 FC 40A BL32 20x20mm
$199.95Sold out
-
Aikon F7 50A Mini V3 Stack (AK32PROII 50A ESC + F7 Mini FC MPU6000)
$206.95In stock
-
Diatone Mamba Stack MK4 F405 Mini 30A 3-5S 8bit 20mm MPU6000
$109.95ONLY 5 LEFT
-
Diatone Mamba Stack MK4 F405 Mini 40A BLS 20x20mm (MPU6000)
$114.95Sold out
Why Us
MantisFPV is the best place to buy the SpeedyBee F7 V3 BL32 50A 30×30 Stack online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 1pm on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Trade Accounts
If you run a business (government or private) or just a one-person media agency, consider applying for a MantisFPV trade account.
Reviews