FPV parts online and in-store. Sydney rules!

TinyTrainer 3 Inch Race Kit

Sale!

Original price was: AU$299.09.Current price is: AU$277.68.

Everything but the electronics for a Five33 TinyTrainer V2 3 inch race quad: the frame and canopy, four DSpec Racing 1404 motors, a TinysLEDs LED kit, the battery tray, two spare arms, three sets of HQ HeadsUp Tiny Props and three GNB 3S HV 530mAh packs. Add your stack, camera, VTX and receiver.

Five33 TinyTrainer 3" Frame Kit V2 with Canopy

The TinyTrainer 3“ Carbon Frame was originally developed for Evan “Headsup” Turner to practice flying big drones in his little backyard but became so much more. The flight characteristics of this drone, with the recommended build, resulting in a racing experience only found in the PRO FPV racing leagues.

Original price was: AU$66.48.Current price is: AU$63.16.

In stock

DSpec Racing 1404 4600KV Motor × 4

Designed for the DSpec Racing Spec3 Series 01, this motor delivers performance even at low throttles. It's not just about power, it's built to last with dustproof and waterproof features (IP53 rated), added washers for durability, and Bearing Shield Technology (BST) for extended bearing life.

Original price was: AU$20.28.Current price is: AU$19.27. each

In stock

TinysLEDs Tiny Trainer V2 LED Standard Kit

The TinysLEDs Tiny Trainer V2 LED Kit is a compact and lightweight LED lighting set made for beginner and trainer FPV quads. It offers bright, easy-to-see LEDs that help with orientation and visibility during practice flights, while being simple to install and low on added weight, perfect for training and casual flying.

Original price was: AU$45.17.Current price is: AU$36.47.

In stock

Five33 TinyTrainer V2 Battery Tray

Armando’s design allows for the use of the battery tray V2 (recommended for 550 mah 3s), micro battery strap, and even rubber bands.

Five33 TinyTrainer V2 Replacement Arm (single) × 2

A replacement arm for the Five33 Tiny Trainer frame kit

Original price was: AU$9.18.Current price is: AU$8.72. each

In stock

HQProp HeadsUp Tiny Propeller 3" 2mm Shaft Propeller (set of 4) × 3

The HQProp HeadsUp Tiny Propeller set includes four 3-inch triple-blade propellers with a 1.8 pitch, crafted from poly carbonate, each weighing 1.21g, designed for the Five33 Tiny Trainer.

GAONENG GNB HV 3S 11.4V 530mAh 90C XT30 LiPo Battery × 3

Introducing GAONENG GNB LiPo Batteries – your ultimate power source for high-performance RC enthusiasts!

Original price was: AU$19.71.Current price is: AU$18.72. each

In stock

Earn 833^ points.
SKU: MF-3889752779 Category:

Description

TinyTrainer 3 Inch Race Kit

The Five33 TinyTrainer was first built so Evan “HeadsUp” Turner could practise flying big race quads in a small backyard. This kit has everything but the electronics for a TinyTrainer V2: the frame with its injection-moulded canopy, four DSpec Racing 1404 motors made for this frame, a TinysLEDs lighting kit, the V2 battery tray, two spare arms, three sets of HQ HeadsUp Tiny Props and three GNB 3S HV 530mAh packs at about 38g each. It follows Five33’s TT Spec for TinyTrainer racing: the V2 frame, 1404 motors, HeadsUp Tiny Props and 3S HV packs under the 50g battery limit.

The V2 is easy to fix at the field. Each arm comes off with one steel M3 screw, and loosening two screws unfolds the canopy for full access to the internals. The nano camera mount is built into the canopy, with 5 to 25 degree and 30 to 60 degree positions. The DSpec motors are IP53 dust and water resistant, use Bearing Shield Technology, and come with their motor screws and T-mount prop screws.

What’s in the kit

  • Five33 TinyTrainer 3″ Frame Kit V2 with Canopy
  • 4x DSpec Racing 1404 4600KV Motor
  • TinysLEDs Tiny Trainer V2 LED Standard Kit
  • Five33 TinyTrainer V2 Battery Tray (choose Black or Blue)
  • 2x Five33 TinyTrainer V2 Replacement Arm (single)
  • 3x HQProp HeadsUp Tiny Propeller 3″ 2mm Shaft Propeller (set of 4) (choose Blue or Grey)
  • 3x GAONENG GNB HV 3S 11.4V 530mAh 90C XT30 LiPo Battery

To finish the build, add a 16×16 stack or 25mm toothpick AIO, a nano camera, a VTX and a receiver. The packs are HV, so charge them on the LiHV setting (4.35V per cell). Building it yourself? Our Ultimate Builders Tool Kit and Ultimate Wiring Kit cover the tools and wire, and a couple of DSpec Pop-Up Racing Gates turn the backyard into a track. Every item here is a normal stock item on our site.
tinytrainer 3 inch race kit mantisfpv australia whats included

Additional information

Brands

Five33 TinyTrainer 3" Frame Kit V2 with Canopy

Brands

DSpec Racing 1404 4600KV Motor

Brands

TinysLEDs Tiny Trainer V2 LED Standard Kit

Brands

Five33 TinyTrainer V2 Battery Tray

Brands

Colour

Black, Blue

Five33 TinyTrainer V2 Replacement Arm (single)

Brands

HQProp HeadsUp Tiny Propeller 3" 2mm Shaft Propeller (set of 4)

Brands

,

Colour

Blue, Grey

GAONENG GNB HV 3S 11.4V 530mAh 90C XT30 LiPo Battery

Brands

Reviews

Be the first to review “TinyTrainer 3 Inch Race Kit”

Your email address will not be published. Required fields are marked *

 

Price Match Request

 

If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Name*
Such as: https://www.mantisfpv.com.au/some-product/
Accepted file types: jpg, jpeg, png, pdf, webm, Max. file size: 20 MB.
20MB limit, valid image files only.

Why Us

MantisFPV is the best place to buy the TinyTrainer 3 Inch Race Kit online.

Our stock levels

Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.

Pricing

We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.

Same day shipping

Orders received before 12pm noon (AEST) on weekdays are processed and shipped that very day.

Local Pickup

Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.

Australian owned and operated

Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!

Shocker!… we have running costs

Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

Loyalty Program

Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop