The M14DAC is built for the big end of town, charging 6-14S packs off a standard wall outlet with no external power supply. On Australian 230V mains it delivers the full 2500W, which is where this charger makes sense: two channels at 1250W and 30A each, or synced into a single output at 2500W and 50A.

ToolkitRC M14DAC Dual Drone Charger 2500W 2x 30A 50A SYNC (AC/DC charger)

The M14DAC is built for the big end of town, charging 6-14S packs off a standard wall outlet with no external power supply. On Australian 230V mains it delivers the full 2500W, which is where this charger makes sense: two channels at 1250W and 30A each, or synced into a single output at 2500W and 50A. Output is via AS150U connectors with DroneCAN support, so it talks to smart batteries on agricultural and heavy lift platforms. Multiple units can also be linked to work together for larger fleets. The 3.5 inch IPS screen, dynamic light strip and carry handle keep it practical to run day to day.

Features

• Dual output with smart power distribution
• 1250W and 30A per channel on 220-240V mains
• 2500W and 50A in sync mode for a single large pack
• AS150U battery interface with DroneCAN smart battery communication
• Multiple units can work together for fleet charging
• Built in AC power supply, no external brick required
• 3.5 inch IPS RGB display with all new UI
• 65W USB-C fast charging output
• Internal resistance measurement across 6-14S
• Dynamic light strip for real time charge status
• Compact for its output, with carry handle
• Multi language user interface
• Protection for short circuit, voltage, reverse polarity, current, capacity, temperature, time out and cut off
• V0 flame retardant housing

Specifications

• Input voltage: AC 220-240V at max 2600W, AC 100-120V at max 1300W
• Battery type: LiPo and LiHV, 6-14S
• Charging power: 1.0-30.0A at 1250W x2 on 220V, 1.0-50.0A at 2500W sync on 220V
• Charging power on 110V: 1.0-30.0A at 600W x2, 1.0-50.0A at 1200W sync
• Discharging power: 1.0-5.0A at 60W x2
• Balance current: max 2000mA at 2-14S
• USB-C output: max 65W at up to 20V
• Internal resistance range: 1mΩ to 9.9Ω at 6-14S
• Controls: 2 sets of buttons
• Output connectors: 2x AS150U male, 1x USB-C
• Display: 3.5 inch IPS RGB LCD, 480x320px
• Product size: 314.7 x 153.9 x 145.6mm
• Product weight: 3100g

Includes

• 1x ToolkitRC M14DAC Charger
• 1x AC Input Cable (AU plug)
• 1x Screen Protector
• 1x Quick Manual
• 1x AS150U to XT90 Male Adaptor