ATOMRC F405 NAVI Wing Flight Controller
AU$72.53
The ATOMRC F405 NAVI is a flight controller built specifically for fixed wing, running either INAV or ArduPilot. Where most F405 boards are aimed at multirotors, this one has 8 PWM outputs and a 5V 5A BEC sized to actually drive servos, plus a separate 9V 2A rail for the VTX and camera. A 120A current sensor, SD card blackbox and 3S to 6S input make it suited to everything from a small park flyer up to a larger long range wing.
ONLY 1 LEFT
Description
ATOMRC F405 NAVI Fixed Wing Flight Controller
The ATOMRC F405 NAVI is a flight controller built specifically for fixed wing, running either INAV or ArduPilot. Where most F405 boards are aimed at multirotors, this one has 8 PWM outputs and a 5V 5A BEC sized to actually drive servos, plus a separate 9V 2A rail for the VTX and camera. A 120A current sensor, SD card blackbox and 3S to 6S input make it suited to everything from a small park flyer up to a larger long range wing.
Features
- Purpose-built for fixed wing, supporting both INAV and ArduPilot firmware
- 8 PWM outputs, enough for ailerons, elevator, rudder, flaps, throttle and more
- 5V 5A BEC with real headroom for servos, rather than the 2A rail typical of multirotor boards
- Separate 9V 2A BEC for the VTX and camera, keeping video power clear of servo noise
- Built-in 120A current sensor for accurate power and consumption data in the OSD
- SD card slot for blackbox logging, with far more capacity than onboard flash
- Onboard AT7456E analog OSD
- Hardware inverter on UART2-RX, so SBUS receivers plug straight in
- 5 UARTs for receiver, GPS, telemetry, air unit and more
- External USB Type-C and buzzer board, so the port can be mounted where you can reach it inside a fuselage
- Wide 12V to 30V input, covering 3S through 6S
Specifications
- MCU: STM32F405RGT6, 168MHz, 1MB flash
- IMU: BMI270
- Barometer: SPL06-001
- OSD: AT7456E
- Blackbox: SD card slot
- UARTs: 5
- PWM outputs: 8
- I2C: 1
- ADC: 3 (VBAT, current, RSSI)
- Inverter: on UART2-RX for SBUS
- Input voltage: 12V to 30V (3S to 6S LiPo)
- Current sensor: 120A
- BEC: 5V 5A for servos, 9V 2A for VTX and camera
- ArduPilot target: ATOMRC F405NAVI
- INAV target: ATOMRC F405NAVI (INAV 5.0 or newer)
- Dimensions: 30 x 50 x 12mm
- Mounting: 30 x 24mm, 3mm holes
- Weight: 21g
Note
This board ships as a kit. Pin headers need to be soldered on before use, so basic soldering skills are required. It is not a plug and play board.
Includes
- 1x ATOMRC F405 NAVI flight controller
- 1x External USB Type-C and buzzer board
- 1x 12cm JST-SH-6P to JST-SH-6P cable
- 1x 20cm JST-SH-6P cable for GPS or DJI air unit
- 1x 35V 470uF capacitor
Additional information
| Brands |
|---|
1 review for ATOMRC F405 NAVI Wing Flight Controller
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
Why Us
MantisFPV is the best place to buy the ATOMRC F405 NAVI Wing Flight Controller online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 12pm noon (AEST) on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Emma Franklin –
I am running ardupilot on it with an hlgrc m100 gps, Skywalker v2 50A esc, it works amazingly well and is well documented on the settings to use and wiring. Be careful with the gps cable as depending on which gos you have the pins send 5v to gnd
(that was the case with my gps, but an easy fix to swap the pins around, just make sure to check before plugging in)
overall amazing FC but I would recommend the deluxe for updating settings wirelessly.