FPV parts online and in-store. Sydney rules!

Happymodel Mobula7 Analog 1S ELRS 2.4G 1080P Split


This Happymodel Mobula7 is a 1S micro whoop with a RunCam Nano 3 Camera. This whoop features the first 5-in-1 AIO and 0802 20000KV motors with a unibell design!


Earn 809^ points.
SKU: MF-1843467636 Categories: ,


Happymodel Mobula7 Analog 1S ELRS 2.4G 1080P Split

Mobula7 1S HD version is a light and efficiency 75mm brushless whoop which provide 1080P HD video record function. A highly integrated AIO Flight Controller, supports ESC with a maximum current output of 12A. We added blackbox for this 1s 75mm HD recorder whoop. Now it could support gyroflow. Although the external blackbox is not install perfectly and insert SD card is not friendly to most of the people, however we still think it’s really excited for this small whoop could record a video with gyroflow steady and keep safe flying .

happy model mantisfpv australia brand logo


  • RunCam Nano 3. The lightest 1/3 CMOS 800TVL Camera
  • X12 5-IN-1 AIO FC and OpenVTX
  • Compatible with 1S Lipo/LIHV
  • RS0802 20000KV motors
  • VTX Power up to 400mw


  • Receiver: SPI ELRS
  • VTX: Onboard 5.8GHz OpenVTX
  • Max Continuous Current: 12A
  • Dimensions: 99x99x40mm
  • Camera: RunCam Nano 3
  • Motors: RS0802 20000KV
  • FC: X12 5-IN-1 AIO
  • Wheelbase: 75mm
  • Input Voltage: 1S
  • Frame: Mobula 7
  • Weight: 24g
  • ESC: 12A

Spare Parts Specifications


  • Model: RS0802 KV20000
  • Configuration: 9N12P
  • Stator Diameter: 8mm
  • Stator Length: 2mm
  • Shaft Diameter: Φ1.5mm
  • Motor Dimensions: Φ10.5mm × 13.5mm
  • Weight: 2.0g
  • Number of Cells (Lipo): 1S only


  • Weight: 0.24g
  • Material: PC
  • Pitch: 1 inch
  • Diameter: 40mm
  • Center Thickness: 5mm
  • Center Hole Diameter: 1.5mm

Flight Controller

  • X12 ELRS V2.1
    • Built-in ELRS 2.4G receiver
    • Target: CRAZYBEEF4SX1280
  • X12 Frsky V1.0/V2.1
    • Built-in SPI FRSKY 2.4G receiver
    • Target: CRAZYBEEF4FR
  • MCU: STM32F411CEU6 (100MHz, 512K FLASH)
  • Sensor: ICM20689 or BMI270 (SPI connection)
  • Mount Hole Size: 25.5mm × 25.5mm
  • Power Supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in Features:
    • 12A (each) Blheli_S 4in1 ESC
    • Betaflight OSD (SPI Control)
    • 5.8G OpenVTX (0mw~400mw)
    • ExpressLRS 2.4G, Frsky D8/D16
    • Voltage detection
    • Current sensor

Onboard 4in1 ESC

  • Power Supply: 1S LiPo/LiPo HV
  • Current: 12A continuous, peak 15A (3 seconds)
  • Support: BLHeliSuite programmable
  • Factory Firmware: Z_H_30_REV16_7.HEX
  • Default Protocol: DSHOT300
  • Support: Bluejay firmware (48kHz startup power: 1100/1200)

Onboard SPI ExpressLRS 2.4GHz Receiver

  • Packet Rate Options: 50Hz/150Hz/250Hz/500Hz
  • Firmware Version: V2.0
  • RF Frequency: 2.4GHz
  • Antenna: Enameled copper wire, 30mm length
  • Telemetry Output Power: <12dBm
  • Receiver Protocol: SPI ExpressLRS
  • Compatibility: ExpressLRS V2.0 TX Module
  • Notes: Cannot flash separately ExpressLRS firmware

Onboard Frsky SPI D8/D16 Receiver Version

  • Type: SPI BUS receiver Frsky D8 D16 compatible
  • Protocol Compatibility: FRSKY D8/D16/D16 LBT/REDPINE/SFHSS
  • Channels: 8 or 16
  • Range: 200 meters (1 m above ground, no interference)
  • Failsafe Support: Yes

Onboard 5.8G OPENVTX

  • Firmware Version: OPENVTX
  • Features: Smartaudio v2.1, PIT Mode, RCE Mode
  • Channels: 48
  • Transmitting Power: 0/RCE/25mw/100mw/400mw
  • Power Supply: DC 5V
  • Current (5V): <650mA (400mw)

Runcam Split3-Lite

  • Model: RunCam Split3-Lite
  • Field of View (FOV):
    • Recording: 165°
    • FPV: 165° (16:9), 130° (4:3)
  • Video Resolution: 1080p at 60fps/50fps/30fps, 720p at 60fps
  • Video File Format: MOV
  • Image Resolution: 2 MP
  • TV Mode: NTSC (720×480) / PAL (720×576) Switchable
  • Interface: JST 1.25mm / UART and SH 1.0mm
  • Max Micro SD Card Supported: 64GB (Class 6 or above, recommend Class 10/UHS-I/II/III)
  • Hole Distance of Installation: 25.5mm × 25.5mm
  • PCB Size: 29mm × 29mm
  • Lens Module Size: 14mm × 14mm
  • Lens Specs: M9
  • Power Input: DC 5-20V (Non-direct power supply from battery)
  • Working Current: 450mA @5V

External Blackbox and Voltage Booster Module

  • Size: 18mm × 15.5mm × 4.5mm
  • Weight: 1.5g
  • SD Card Support: Max 32GB (FAT32 Format)
  • Notes: Handle TF SD Card insertion carefully and do not remove it while installing the battery.


  • 1x Happymodel Mobula7 1S 75mm Micro Analog Whoop ELRS 2.4
  • 8x Gemfan 1610 2-Blade Propellers (4CW + 4CCW)
  • 1x 1S Parallel Charging Board
  • 1x Spare Camera Canopy
  • 1x Prop Removal Tool
  • 1x Screwdriver

Additional information


Receiver Type



    Be the first to review “Happymodel Mobula7 Analog 1S ELRS 2.4G 1080P Split”

    Your email address will not be published. Required fields are marked *


    Price Match Request


    If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).

    "*" indicates required fields

    Such as: https://www.mantisfpv.com.au/some-product/
    Accepted file types: jpg, jpeg, png, pdf, webm, Max. file size: 20 MB.
    20MB limit, valid image files only.
    This field is for validation purposes and should be left unchanged.

    Why Us

    MantisFPV is the best place to buy the Happymodel Mobula7 Analog 1S ELRS 2.4G 1080P Split online.

    Our stock levels

    Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
    We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.


    We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
    Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.

    Same day shipping

    Orders received before 1pm on weekdays are processed and shipped that very day.

    Local Pickup

    Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.

    Australian owned and operated

    Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!

    Shocker!… we have running costs

    Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂

    Loyalty Program

    Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.

    Trade Accounts

    If you run a business (government or private) or just a one-person media agency, consider applying for a MantisFPV trade account.

      Your Cart
      Your cart is emptyReturn to Shop