HDZero AIO5 F4 5A ELRS 2.4 [HDZ5000]
![HDZero AIO5 F4 5A ELRS 2.4 [HDZ5000]](https://cdn2.mantisfpv.com.au/wp-content/uploads/2024/10/hdzero-aio5-f4-5a-elrs-2-4-syntegra-australia.jpeg?strip=all "HDZero AIO5 F4 5A ELRS 2.4 [HDZ5000] 1")
![HDZero AIO5 F4 5A ELRS 2.4 [HDZ5000] - Image 2](https://cdn2.mantisfpv.com.au/wp-content/uploads/2024/10/hdzero-aio5-f4-5a-elrs-2-4-includes.jpg?strip=all "HDZero AIO5 F4 5A ELRS 2.4 [HDZ5000] 2")
![HDZero AIO5 F4 5A ELRS 2.4 [HDZ5000] - Image 3](https://cdn2.mantisfpv.com.au/wp-content/uploads/2024/10/hdzero-aio5-f4-5a-elrs-2-4-antenna.jpeg?strip=all "HDZero AIO5 F4 5A ELRS 2.4 [HDZ5000] 3")
![HDZero AIO5 F4 5A ELRS 2.4 [HDZ5000] - Image 4](https://cdn2.mantisfpv.com.au/wp-content/uploads/2024/10/hdzero-aio5-f4-5a-elrs-2-4-mounitng.jpeg?strip=all "HDZero AIO5 F4 5A ELRS 2.4 [HDZ5000] 4")
Description
HDZero AIO5 F4 5A ELRS 2.4 [HDZ5000]
HDZero AIO5 is the world’s first digital video AIO, enabling bind and fly 65mm whoops to weigh less than 19.4g. AIO5 integrates a F4 flight controller, HDZero 5.8GHz digital video transmitter, SPI 2.4GHz ExpressLRS 3.0 receiver, DSHOT protocol 4-in-1 ESC, and a 5V/1A BEC.
The minimum voltage has been improved to be 2.5V, which ensures that video never stops transmitting before the motors stop working. Using a single thick PCB rather than a stack of 2 improves durability and simplicity – get ready for a new era of no-compromise tiny whooping in clear digital video!
The HDZero AIO5 is an excellent collaboration between Happymodel and HDZero. It is available at major FPV resellers worldwide, and also at Happymodel and HDZero official online shops.
Specifications
- MCU: STM32F411 (100MHz, 512K Flash)
- Gyro: BMI270
- On board voltage and amperage meters
- Built-in 5A(each) BLHeli_S 4-in-1 ESC
- MCU: EFM8BB21
- HV Current: 5A continuous peak 6A (3 seconds)
- Factory firmware: O_H_5_48_V0.19.2.HEX
- Dshot600 ready
- Built-in 5.8G HDZero VTX
- RF output: 25mw/200mW
- Supported channels: R1-R8, F2/F4, L1-L8
- UFL connector (ultra-lite linear antenna included)
- Built-in SPI ExpressLRS 2.4GHz receiver
- Packet rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
- Pre-soldered enamel wire antenna
- Telemetry output power: <12dBm
- Built-in 5V 1A BEC
- Flight controller firmware target: CRAZYBEEF4SX1280
- Power supply: 1S battery (2.5V – 4.35V)
- Fully compatible with the popular whoop frames
- Board size:28.5×28.5mm with a 25.5×25.5 mounting hole size
- Weight: 5.7g(without motor plugs), 6.3g (with motor plugs)
Includes
- 1x HDZero AIO5 board
- 1x Power cable with inverted angle A30 connector
- 4x screws
- 4x rubber grommets
- 1x ultra-lite linear VTX antenna
Additional information
| Brands |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
Why Us
MantisFPV is the best place to buy the HDZero AIO5 F4 5A ELRS 2.4 [HDZ5000] online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 12pm noon (AEST) on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Reviews