HGLRC Rekon 35 V2 Nano Long Range DJI O4 FPV Drone 18650 BNF ELRS 2.4G
AU$652.81
The Rekon35 V2 is all about simplicity and convenience! This tiny quad is designed around a single, standard 18650 Lithium-Ion cell.
ONLY 1 LEFT
Description
HGLRC Rekon 35 V2 Nano Long Range DJI O4 FPV Drone 18650 BNF ELRS 2.4G
The Rekon 3.5 is what I always wanted the original #MicroLongRage to be; Sub 250g and powered by a 2S Li-Ion!
Two years ago, the components to make such a concept work properly just weren’t available: Electronics were not running reliably when the power supply dropped below 5V, efficient motor-prop combos with the right size weren’t available and building DIY 2S Li-Ion packs was laborious. But the FPV industry has made a stunning amount of progress and today, with the support of HGLRC the Rekon 3.5 is finally making it happen. You can simply use cheap off-the-shelf 18650 batteries and the electronics are so reliable that in an emergency you can empty the Li-Ion batteries way below the recommended voltage without any impact on the FPV video feed and radio control link.
Dave C_FPV
Note:
- Using two 18650 power batteries, achieve up to 15 minutes long-Endurance flying
- Supports 15W fast charging.Connect charging cable to initiate safe, balanced charging (auto-stop when full).
- Power button lights with One-Button Startup
- Its new-gen STM32H743 High-Performance FC brings powerful processing, rapid response, and seamless control.
- Fully Enclosed Injection-Molded Body can protects internal hardware effectively.
- Multi-function Buzzer Prompt/Customizable RGB Light Strip/Use M100 Mini GPS to compact and precise positioning.
- Do not store batteries inside the drone for more than 3 days. After flight or charging, please remove the battery from the drone to prevent over-discharge.
- Initial satellite acquisition may take longer. Please connect via USB for satellite locking instead of using the battery to avoid VTX overheating. If satellites cannot be locked, stay away from high-power electrical equipment and interference sources.
- Power Kits match with DJI O4 VTX. The original DJI O4 coaxial cables are incompatible due to length constraints.Please replace with compatible coaxial cables for proper installation.
Specifications
- Frame: Rekon 35 V2 Long Range Frame
- FC：HGLRC H743 20A ELRS 2.4G 2S V1 AIO
- MCU：STM32H743
- GYRO：ICM42688P
- FC Firmware：HGLRCH743
- Input voltage:2S 7.4V
- VTX：DJI O4 Lite
- Motor：SPECTER 1404 5500KV(2S)
- GPS：M100 Mini GPS
- Propeller：GEMFAN 3630
- Wheelbase：160mm
- Size：150mm*155mm
- Analog Weight：174g
- HD Weight：180g
Includes
- 1x Rekon 35 V2 Drone
- 8x GEMFAN 3630
- 8xM2*8 stainless steel screw
- Type-C Cable
Recommended battery:
- 2x HGLRC 18650 Battery
Additional information
| Brands |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
Why Us
MantisFPV is the best place to buy the HGLRC Rekon 35 V2 Nano Long Range DJI O4 FPV Drone 18650 BNF ELRS 2.4G online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 12pm noon (AEST) on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Reviews