SpeedyBee F405 V3 BLS 50A 30×30 Stack
$119.95
The SpeedyBee F405 V3 Flight Controller, with its advanced STM32F405 MCU and BMI270 gyro, is engineered for precision in the sky, further enhanced by its Type-C USB and integrated barometer.
Sold out
Description
SpeedyBee F405 V3 BLS 50A 30×30 Stack
The SpeedyBee F405 V3 Flight Controller, with its advanced STM32F405 MCU and BMI270 gyro, is engineered for precision in the sky, further enhanced by its Type-C USB and integrated barometer. Designed for the modern FPV pilot, it features a seamless connection to DJI systems and customizable BetaFlight configurations via a user-friendly Bluetooth connection. A blackbox microSD slot, diverse power outputs, and multiple UARTs offer extensive data logging and peripheral support. Complementing this is the robust SpeedyBee BLS 50A 4-in-1 ESC, leveraging BLHeli_S technology to deliver consistent 50A power and surge protection, all controllable via the SpeedyBee app. This stack promises to be a reliable cornerstone for any custom drone build, prioritizing performance and ease of use.
Specifications
SpeedyBee F405 V3 30×30 Flight Controller
- MCU: STM32F405
- IMU (Gyro): BMI270
- USB Port Type: Type-C
- Barometer: Built-in
- OSD Chip: AT7456E chip
- BLE Bluetooth: Supported for Flight Controller configuration (MSP enabled, Baud rate 115200 on UART4)
- Wi-Fi: Not supported
- DJI Air Unit Connection: Two methods supported – 6-pin connector or direct soldering
- 6-pin DJI Air Unit Plug: Compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1 without wire changes
- Blackbox: MicroSD Card Slot (Support for Standard or High Capacity cards up to 32GB, with FAT16 or FAT32 formatting)
- BetaFlight Camera Control: Yes, with CC pad on the front side
- Current Sensor Input: Supported (For SpeedyBee BLS 50A ESC, set scale = 386 and offset = 0)
- Power Input: 3S – 6S Lipo (G, BAT pins/pads from 8-pin connector or bottom side)
- 5V Output: 9 groups, total current load 2A
- 9V Output: 2 groups, total current load 2A
- 3.3V Output: Up to 500mA current load
- 4.5V Output: Up to 1A current load (supports receiver and GPS module)
- ESC Signal: M1 – M4 on the bottom, M5-M8 on the front side
- UART: 6 sets (UART1 to UART6, with dedicated UART4 for Bluetooth and UART5 for ESC telemetry)
- ESC Telemetry: UART R5 (UART5)
- I2C: Supported (SDA & SCL pads on front side)
- Betaflight LED Pad: Supported
- Buzzer: BZ+ and BZ- pad for 5V Buzzer
- BOOT Button: Supported for entering DFU mode or controlling LED strips
- RSSI Input: Supported, marked as RS on the front side
- Smart Port / F.Port: Not supported
- Supported Firmware: BetaFlight (Default), INAV (Note: DShot not supported with INAV)
- Firmware Target Name: SPEEDYBEEF405V3
- Mounting: 30.5 x 30.5mm (4mm hole diameter)
- Dimensions: 41.6(L) x 39.4(W) x 7.8(H) mm
- Weight: 9.6g
SpeedyBee BLS 50A 30×30 4-in-1 ESC
- Firmware: BLHeli_S JH50
- Wireless Configuration: Supported in SpeedyBee app
- PC Configurator: Download Link
- Continuous Current: 50A * 4
- Burst Current: 55A (for 5 seconds)
- TVS Protective Diode: Yes
- External Capacitor: 1000uF Low ESR Capacitor included
- ESC Protocol: DSHOT300/600
- Power Input: 3-6S LiPo
- Power Output: VBAT
- Current Sensor: Support (Scale=386 Offset=0)
- ESC Telemetry: Not supported
- Mounting: 30.5 x 30.5mm (4mm hole diameter)
- Dimensions: 45.6(L) x 44(W) x 6.1(H) mm
- Weight: 13.8g
Includes
- 1x SpeedyBee F405 V3 BLS 50A 30×30 Stack
Manual
Additional information
| Brand |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
Why Us
MantisFPV is the best place to buy the SpeedyBee F405 V3 BLS 50A 30×30 Stack online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 1pm on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Trade Accounts
If you run a business (government or private) or just a one-person media agency, consider applying for a MantisFPV trade account.
Reviews