STARTFPV VT5 Pro HD Digital Video Transmission System Bundle
Description
STARTFPV VT5 Pro HD Digital Video Transmission System Bundle
The STARTFPV VT5 Pro is a complete 1080p digital video link built for pilots who want clean HD footage without the setup headache. The air unit pairs a 2MP sensor with a 155 degree lens and dual antenna MIMO, pushing 1080p60 to the ground unit at 60ms latency. The ground unit outputs straight over HDMI or Type-C DP, so it plugs into any HDMI goggle or monitor with no extra hardware in between. At 8.2g including the camera module, the air unit fits everything from 3 inch cinewhoops to fixed wing, and the 5V to 26V input range means it runs off just about any pack you throw at it.
Features
- 1080p at 60fps for smooth, tear free video that makes fast flying safer to read
- 60ms end to end latency, close enough to analog for racing and freestyle
- Dual antenna MIMO with intelligent switching to cut dropouts and blind spots
- Wide dynamic range keeps the image clear in harsh backlight and bright sun
- HDMI plug and play into FPV goggles or monitors, no configuration needed
- Active cooling with a quiet built in fan for stable long runs without thermal throttling
- Automatic power adaption and auto frequency selection, with manual channel control when you need to dodge interference
- Works across multi rotors, fixed wing, RC cars and boats
- Onboard recording and OSD on the ground unit
Specifications
Air Unit
- Model: Slink TX
- Image sensor: 2MP 1/2.7″ CMOS
- Resolution: 1080p at 60fps
- FOV: 155 degrees
- WDR: Supported
- Power auto-sense: Automatic
- Auto frequency: Automatic
- Antenna: Dual antenna, IPEX1 x 2
- Output power: Up to 25dBm
- Range: 2km on default antennas, up to 6km in open environments
- Latency: 60ms
- Max power consumption: 5W
- Frequency band: 4.9 to 5.9GHz
- Operating voltage: 5V to 26V
- Weight: 8.2g including camera module
- Mounting: 25.5 x 25.5mm
- Dimensions: 29 x 29mm
Ground Unit
- Model: Slink VRX (F1-VRX)
- Video output resolution: 1080p at 60fps
- Video output: HDMI and Type-C DP
- Recording: Supported
- OSD: Supported
- Power adaption: Automatic
- Auto channel: Supported
- Antenna: Dual antenna, IPEX1 x 2
- Transmit power: Up to 25dBm
- Range: 2km on default antennas, up to 6km in open environments
- Latency: 60ms
- Max power consumption: 5W
- Frequency band: 4.9 to 5.9GHz
- Operating voltage: 9V to 24V
- Mounting: 25.5 x 25.5mm
- Dimensions: 59 x 21 x 76mm without antennas, 59 x 21 x 170mm with antennas
Includes
- 1x STARTFPV VT5 Pro Air Unit with camera module
- 1x STARTFPV VT5 Pro Ground Unit
- 2x Air unit antenna
- 2x Ground unit antenna
- 1x Power and signal cable set
Range figures are tested in open, interference free conditions. Actual performance varies with your local RF environment. The ground unit requires goggles or a monitor with HDMI input.
Additional information
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Why Us
MantisFPV is the best place to buy the STARTFPV VT5 Pro HD Digital Video Transmission System Bundle online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 12pm noon (AEST) on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.






Reviews