HGLRC Petrel 75 Whoop V2 1S Quadcopter ELRS 2.4G
AU$239.26
The HGLRC Petrel 85Whoop is a lightweight 2S brushless FPV drone designed for beginner indoor and light outdoor flying. It features a 5-in-1 flight controller, RunCam Nano 4 camera, 400mW video transmitter, ELRS receiver and powerful 1202.5 11000KV motors for smooth, responsive performance.
ONLY 5 LEFT
Description
HGLRC Petrel 75 Whoop V2 1S Quadcopter ELRS 2.4G
The HGLRC Petrel 75 Whoop V2 is a 1S brushless indoor FPV drone built for beginners, suitable for indoor flying and light outdoor conditions. It runs the new SPECTER 10A 5-in-1 AIO board with a RunCam Nano 4 camera, 400mW analog video transmitter and 0802 21000KV motors, all at around 30g.
Features
- 75mm four-axis 1S brushless whoop for indoor or light outdoor flying
- New SPECTER 10A 5-in-1 AIO integrating 4-in-1 ESC, flight controller, video transmitter and ELRS receiver
- RunCam Nano 4 camera for a clear, sharp picture
- Onboard 400mW analog video transmitter with up to 48CH
- 0802 21000KV brushless motors paired with Gemfan 1610 two-blade props for smooth power
- Lightweight at around 30g, with roughly 5 minutes of flight on a single battery
- In-line motors, no soldering needed
- Onboard SPI ELRS 3.0 receiver with built-in antenna, or external TBS receiver with a custom miniature T-antenna to save weight
- Recommended battery: 1S 450mAh to 550mAh high voltage, A30 plug
Specifications
- Frame: Petrel 75 Whoop V2
- Flight controller: SPECTER 10A AIO, MCU STM32F411, gyro BMI270
- Built-in receiver: SPI ExpressLRS 2.4GHz
- Built-in video transmitter: 0-RCE-25-100-400mW (adjustable)
- Onboard ESC: 10A continuous, 13A peak (10s)
- ESC protocol: DShot600, Oneshot, Multishot
- ESC firmware: Z_H_30 (Bluejay)
- Flight controller firmware: HGLRCF411SX1280 V2
- Input voltage: 1S 3.7V-7.4V (LiPo)
- Mounting hole: 25.5 x 25.5mm M2
- Motor: SPECTER 0802 21000KV
- Propeller: Gemfan 1610 two-blade
- Weight: ELRS version 27±1g
- Battery connection: A30
Note
The SPI receiver does not support D modes (D250, D500), F modes (F500, F1000) or Full Res modes (100Hz Full Res, 333Hz Full Res). If you are using an ELRS TX module and cannot bind or raise the packet rate, set the module packet rate to between 50Hz and 500Hz and avoid any mode starting with D or F.
Includes
- HGLRC Petrel 75 Whoop V2 1S Quadcopter ELRS 2.4G ×1
- Gemfan 1610 two-blade propeller ×8
Additional information
| Brands |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
Why Us
MantisFPV is the best place to buy the HGLRC Petrel 75 Whoop V2 1S Quadcopter ELRS 2.4G online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 12pm noon (AEST) on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Reviews