iFlight Blitz Mini F745 Stack (E55 Mini 4in1 ESC + F745 FC)
$219.95
The BLITZ Mini F7 V1.1 Flight Controller and E55 4-IN-1 2-6S ESC combo pack offers advanced flight control technology with plug-and-play simplicity, featuring visual debugging via FC indicator LEDs and support for a wide range of protocols. Designed for precision and efficiency, this lightweight and compact setup ensures a superior flying experience with reduced electrical noise and optimized component performance.
ONLY 1 LEFT
Description
iFlight Blitz Mini F745 Stack (E55 Mini 4in1 ESC + F745 FC)
The BLITZ Mini F7 V1.1 Flight Controller and E55 4-IN-1 2-6S ESC combo pack offers advanced flight control technology with plug-and-play simplicity, featuring visual debugging via FC indicator LEDs and support for a wide range of protocols. Designed for precision and efficiency, this lightweight and compact setup ensures a superior flying experience with reduced electrical noise and optimized component performance.
FC Specifications
- MCU: STM32 F722
- Gyro: BMI270
- Barometer: DPS310
- OSD Chip: AT7456
- Flash: 8MB (Blackbox flash)
- UARTs: 6
- Motor Outputs: 4x (SH1.0 connector)
- I2C Serial: SDA / SLA pads
- Smartaudio / IRC Tramp VTX Protocol Supported
- LED Controller: Yes
- Beeper Pad: Yes
- Firmware Target: IFRC-IFLIGHT_BLITZ_F722
- Mount Pattern: 20×20 mm / 4mm PCB hole diameter, silicone grommets for M3 screws
- Dimensions: 30.5×27 mm
- Weight: 5g
Wiring Suggestion
- UART 1: For VTX HD / Analog
- UART 2: For a Receiver
- UART 3/4/5: For GPS or other sensors that require a serial port
- UART 6: For ESC Telemetry
ESC Specifications
- Mounting Holes: 20*20mm/Φ4mm
- Weight: 11.3g
- Supports: 2-6S Lipo input
- MCU: G071
- Constant: 55 Amps
- Burst: 60 Amps
- Current Sensor: Yes
- BEC: No
- Current Rate: 200
- Supports: DShot150/300/600/MultiShot/OneShot etc.
- Firmware: BLHeli 32
- Target: IFLIGHT_BLITZ_G071_01 32.9
- Firmware: BLHeli 32
Includes
- 1x BLITZ Mini F7 V1.1 Flight Controller
- 1x BLITZ Mini E55 4-IN-1 2-6S ESC
- Silicone grommets
- Wire harness for F7 Flight Controller
Note
If you need to use the ESC in the iH3 O3 Frame kit, please remove the capacitor after receiving the ESC, and then install the ESC.
Additional information
| Brand |
|---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Related products
-
SpeedyBee F405 V3 BLS 50A 30×30 Stack
$119.95Sold out
-
Diatone Mamba Stack MK4 F405 Mini 30A 3-5S 8bit 20mm MPU6000
$109.95ONLY 5 LEFT
-
Axis Flying Argus Plug and Play F7 65A Stack 30×30 (MPU6000)
$239.95ONLY 2 LEFT
-
Axis Flying Argus PRO Plug & Play Stack (F722 FC + 65A 3-6S BLHeli_32 ESC)
$256.35ONLY 2 LEFT
Why Us
MantisFPV is the best place to buy the iFlight Blitz Mini F745 Stack (E55 Mini 4in1 ESC + F745 FC) online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 1pm on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Trade Accounts
If you run a business (government or private) or just a one-person media agency, consider applying for a MantisFPV trade account.
Reviews