SpeedyBee F405 V4 BLS 55A Stack 30x30mm
$134.95
The SpeedyBee F405 V4 30×30 Flight Controller is a state-of-the-art device designed for advanced FPV (First Person View) drone enthusiasts. Featuring a powerful STM32F405 MCU and an ICM42688P IMU for precise flight control, it includes a Type-C USB port, built-in barometer, and an AT7456E OSD chip for real-time data display.
Sold out
Description
SpeedyBee F405 V4 BLS 55A Stack 30x30mm
The SpeedyBee F405 V4 30×30 Flight Controller is a state-of-the-art device designed for advanced FPV (First Person View) drone enthusiasts. Featuring a powerful STM32F405 MCU and an ICM42688P IMU for precise flight control, it includes a Type-C USB port, built-in barometer, and an AT7456E OSD chip for real-time data display. It supports BLE Bluetooth for easy configuration and is compatible with the DJI Air Unit for seamless FPV video transmission. With a range of power options, multiple UART ports for extensive connectivity, and a blackbox microSD card slot for flight data recording, this flight controller is tailored for those seeking optimal performance in their FPV drone setups. Additionally, the SpeedyBee BLS 55A 30×30 4-in-1 ESC offers robust power management with continuous 55A current per channel, making it an ideal companion for the flight controller to ensure smooth and reliable drone flights.
Specifiations
SpeedyBee F405 V4 30×30 Flight Controller
- Product Name: SpeedyBee F405 V4 30×30 Flight Controller
- MCU: STM32F405
- IMU (Gyro): ICM42688P
- USB Port Type: Type-C
- Barometer: Built-in
- OSD Chip: AT7456E
- BLE Bluetooth: Supported for configuration via MSP on UART4 (Baud rate 115200)
- WIFI: Not supported
- DJI Air Unit Connection: Two methods – 6-pin connector or direct soldering
- 6-pin DJI Air Unit Plug: Compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1 without wire changes
- Blackbox MicroSD Card Slot: Supports Standard (SDSC) or High Capacity (SDHC) under 32GB. Must be formatted in FAT16 or FAT32. Max recognized size by Betaflight is 4GB. Use recommended formatting tool and SD cards.
- Current Sensor Input: Supported (for SpeedyBee BLS 55A ESC, set scale=400 and Offset=0)
- Power Input: 3S – 6S Lipo
- 5V Output: 9 groups, total current load 3A
- 9V Output: 2 groups, total current load 3A
- 3.3V Output: Supported, up to 500mA load
- 4.5V Output: Supported, up to 1A load (for receiver and GPS module)
- ESC Signal: M1 – M8
- UART: 6 sets (UART1-6), with UART4 dedicated for Bluetooth and UART5 for ESC telemetry
- ESC Telemetry: Supported on UART R5
- I2C: Supported for magnetometer, sonar, etc.
- Betaflight LED Pad: Supported for WS2812 LED
- Buzzer: 5V buzzer support
- BOOT Button: Supports entering DFU mode and controlling LED strips
- RSSI Input: Supported
- Smart Port / F.Port: Not supported
- Supported Firmware: BetaFlight (Default), INAV
- Firmware Target Name: SPEEDYBEEF405V4
- Mounting: 30.5 x 30.5mm (4mm hole diameter)
- Dimensions: 41.6 x 39.4 x 7.8mm
- Weight: 10.5g
SpeedyBee BLS 55A 30×30 4-in-1 ESC Specifications
- Product Name: SpeedyBee BLS 55A 30×30 4-in-1 ESC
- Firmware: BLHeli_S J-H-40
- PC Configurator Download Link: https://esc-configurator.com/
- Continuous Current: 55A * 4
- Burst Current: 70A (10 seconds)
- TVS Protective Diode: Yes
- External Capacitor: 1000uF Low ESR Capacitor included
- ESC Protocol: DSHOT300/600
- Power Input: 3-6S LiPo
- Power Output: VBAT
- Current Sensor: Supported (Scale=400, Offset=0)
- ESC Telemetry: Not supported
- Mounting: 30.5 x 30.5mm (4mm hole diameter)
- Dimensions: 45.6 x 44 x 8mm
- Weight: 23.5g
Includes
- 1x SpeedyBee F405 V4 BLS 55A Stack 30x30mm
Additional information
Brand |
---|
Price Match Request
If you find an Australian FPV store with a lower advertised price of the same “in-stock” item, let us know so we can match (or otherwise BEAT!) their price. This excludes any non-official, non-Australian stockist (such as overseas eBay sellers, Banggood, AliExpress).
"*" indicates required fields
Why Us
MantisFPV is the best place to buy the SpeedyBee F405 V4 BLS 55A Stack 30x30mm online.
Our stock levels
Are 99.8% accurate. What you see online regarding stock, is WHAT WE HAVE in hand, ready to be dispatched/shipped. Really.
We do try to stock everything, but that is simply a tall order. If you need something that we don’t have, let us know here.
Pricing
We try to price competitively and fairly. MantisFPV is all about having the right FPV parts in stock, when you need it.
Are we the cheapest? We try. If we are not, fill in the “Price Match Request” form on this page.
Same day shipping
Orders received before 1pm on weekdays are processed and shipped that very day.
Local Pickup
Are you nearby Parramatta? Simply opt for local pickup when you place your online order. Sometimes, you just need something… RIGHT NOW. In any case, please wait for our email to let you know your order is ready for pickup.
Australian owned and operated
Made with ❤️ in Parramatta, Sydney. We are indeed a local Aussie small business. We are GST registered, so we pay our fair share of GST collected from our sales. Help support your local Aussie FPV store, forget those overseas stores like Banggood or AliExpress. Heck, who can really tolerate deliveries that takes 3 months anyway?!
Shocker!… we have running costs
Maintaining, stocking, shipping and importing FPV parts costs money and carries inherent risks. We try our very best to be competitive in pricing but we also need to pay wages, rent, taxes and pay for the bad stuff, like dead stock, shrinkages, fraud and importing challenges. However, we forget all this when we are able to help cure treat your FPV addiction 🙂
Loyalty Program
Get rewarded for simply purchasing from us. There are other ways you can earn even more points! Check out our loyalty program to learn more.
Trade Accounts
If you run a business (government or private) or just a one-person media agency, consider applying for a MantisFPV trade account.
Reviews